Central Monitor Designed for patient safety Central Monitoring System Fighting Disease with Electronics

The ward can be a room with a view

Dual wide display One main unit can have two displays that operate separately and display different information. You can view all patient information on a combination of two display monitors. Up to 32 patients Up to 32 patients can be simultaneously monitored. Easy alarm setup Alarms for 8 basic parameters can set on one screen. Touch screen operation Easy and fast. Just touch the parameter you want to change. Reliable alarms You can reduce false alarms by reviewing alarm and measurement conditions on the alarm review screen. Flexible 72-hour data storage The nine different review screens are...

Up to 32 patients The CNS-6201 central monitor provides up to 32 patients simultaneous monitoring. You can connect any Life scope series bedside monitors by Ethernet LAN. You can also monitor telemetry patients’ transmitter signals with a multi patient receiver to create the ideal hardwired, telemetry, or mixed system for your facility. Flexible screen layouts for any number of patients 32 patients (dual display)

Easy alarm setup Alarm levels of 8 basic parameters can set on one screen. Multi patient limits screen The multi patient limits screen helps you set alarms more efficiently. Alarm levels for up to 8 patients are shown on one screen so you can check and change alarm settings compared to other patients. Touch screen operation Operating menus are similar to other Life scope series monitors. Most functions can be done in just 3 steps. With an NKD-ELO24 LCD display (24-inch color), you can operate the monitor by touch screen. You can also use a local purchase display and operate the monitor by keyboard...

Reliable alarms Typical central monitors cause too many false alarms so staff can’t rely on them. Many false alarms are caused by technical alarms and unsuitable alarm settings. In order to improve this, a new Multi Patient Alarm Event window was added to CNS-6201. This can help reduce false alarms and provide high quality patient care. Alarm type hide and display In the multi patient alarm event window, you can hide or display specific alarm types. • Limit alarm Vital signs alarms indicate the condition of each parameter. • Arrhythmia alarm You can check the frequency of arrhythmias on one screen....

Alarm related features Optional alarm indicator the display can be clearly seen at a distance. The blinking or steady lighting condition and color shows alarm information. The blinking alarm indicator can also be synchronized with heart rate, blood pressure or ADAM SMITH Color coded alarm level Alarms are indicated by a blinking frame and highlighted message. Red shows CRISIS alarms and orange shows WARNING alarms.

Flexible 72-hour data storage Synchronized review data All 9 review screens are time-synchronized so that when you find an alarm or arrhythmia episode, you can see the same event on other review screens as full disclosure, trend or numeric data to check details. 9 ways 1) Trend graphs Trend graphs of 4 parameters and 2 events of the last 72 hours can be displayed. 2) Tabular trends Numeric data of measured parameters for the latest 72 hours can be displayed in a table. 9) Alarm events window 72-hour alarm lists for 8 persons can be displayed at the same time. There are 3 types of alarm displays:...

to review 8) Alarm history The latest 1,000 files can be saved for each bed. The alarm history window displays the file list with report creation time, alarm levels, parameters, descriptions, and other information. 12-lead ECG analysis waveform, average waveform, comparison waveforms, and analysis reports from the bedside monitor can be displayed. 6) Full disclosure ECG Six 72-hour full disclosure waveforms for each patient can be stored and reviewed. 5) ST recall ST recall files are created at specified intervals. Up to 4,320 files can be saved. 7 files can be displayed at the same time.

Flexible configuration An optional multiple patient receiver unit receives signals from up to 8 patients’ transmitters. Life Scope Network NetKonnect With optional NetKonnect, you can review real-time patient data anytime and anywhere from your PC with a web browser. HL7 Gateway An HL7 gateway connects the LS-NET monitor network to the HIS (Hospital Information System). With the HL7 gateway, vital sign data in the bedside monitor can be transferred using HL7 protocol. Hospital Network (HIS/CIS) Doctor’s office NetKonnect Server NICU Firewall General ward Internet General ward Web browser

Specifications Display unit Waveform display method: Non-fade, fixed trace 1 to 6 traces per patient (up to 32 patients) Sweep speed Waveform display items ECG, IBP, Respiration wave, Pulse (SpO2), EEG, Flow/Paw, CO2, External input, (depends on the connected monitor) Alphanumeric display items Heart rate, Pulse rate, VPC rate, Respiration rate, ST level, IBP (systolic, diastolic, (depends on the connected monitor) mean), Temperature, SVO2, Flow/Paw, N2O, O2, Agent, BIS, TcPO2, TV, MV, PEEP, other Arrhythmia detection items Asystole, VF, Extended Tachycardia, Extended Bradycardia, VT, Tachycardia,...

This brochure may be revised or replaced by Nihon Kohden at any time without notice. NIHON KOHDEN te?WL ?NK NIHON KOHDEN CORPORATION 1-31-4 Nishiochiai, Shinjuku-ku, Tokyo 161-8560, Japan Printed in Japan on FSC certified paper