«NDI» SYSTEM OF DENTAL IMPLANTS
13Pages

«NDI» SYSTEM OF DENTAL IMPLANTS

SCREW IMPLANTS “OPTIMUM” SERIES HEXAGON-CONICAL CONNECTION THREAD GEOMETRY SMART SURFACE STRUCTURE Dear colleagues! Possibility of one-phase and two-phase implantation process. We represent a German system of screw titanium implants “NDI” All products are disinfected and sterilized using well proved method which is developed and permanently being improving by a group of radiation treatment with gamma rays. of companies “NIKO DENTAL GmbH”. An implant is delivered together with a screw plug, in double pack- German system of screw implants “NDI” means the highest quality, simplicity,...

SCREW IMPLANTS “OPTIMUM” SERIES I IMPLANTS INTERNAL HEXAGONAL CONICAL CONNECTION SPECIAL CARVING, ADVANCED MICRORELIEF SMART SURFACE TREATMENT INTERNAL HEXAGONAL CONICAL CONNECTION SPECIAL CARVING, ADVANCED MICRORELIEF SMART SURFACE TREATMENT Closing screw is included Closing screw is included

SCREW IMPLANTS “STANDARD PLUS” SERIES I IMPLANTS INTERNAL HEXAGONAL CONICAL CONNECTION SPECIAL CARVING, ADVANCED MICRORELIEF SMART SURFACE TREATMENT SCREW IMPLANTS “SHORT” SERIES Ns INTERNAL HEXAGONAL CONICAL CONNECTION SPECIAL CARVING, ADVANCED MICRORELIEF SMART SURFACE TREATMENT ANGLED ABUTMENTS 20° Ns length, mm Closing screw is included Fixing screw is included

STRAIGHT ABUTMENTS STRAIGHT ABUTMENTS FIXING SCREW FOR ABUTMENTS Fixing screw is included Fixing screw is included

SURGICAL KIT INSTRUMENTS VARIANT I N°6.100 STARTER SURGICAL KIT IMPLANT DRILLS VARIANT I I N6.101 FULL SURGICAL KIT VARIANT I 1. STAINLESS STEEL BOX - 1 pcs. 2. TORQUE WRENCH - 1 pcs. 3. PILOT DRILL - 1 pcs. 4. HEX KEY FOR IMPLANTS - 3 pcs. 5. HEX PROSTHETIC KEY 1,2-1 pcs. 6. PARALLELING PIN - 2 pcs. 7. IMPLANT DRILL - 6 pcs. SIZE: 155x95x45 mm VARIANT II 1. STAINLESS STEEL BOX - 1 pcs. 2. TORQUE WRENCH - 1 pcs. 3. ROUND BURR - 1 pcs. 4. PILOT DRILL - 1 pcs. 5. HEX KEY FOR IMPLANTS - 3 pcs. 6. HEX PROSTHETIC KEY 1,2 mm (short and long) - 2 pcs. 7. PARALLELING PIN - 4 pcs. 8. IMPLANT DRILL -...

INSTRUMENTS & ACCESSORIES INSTRUMENTS & ACCESSORIES N° 6.51 FINAL DRILLS FOR IMPLANTS “SHORT” SERIES ROUND BURR LANCE DRILL BONE MILL (pilot drill) 25,0 to finalise the formation of bone socket GINGIVAL FORMER (standard) GINGIVAL FORMER (standard) GINGIVAL FORMER (wide)

PROSTHETIC SET INSTRUMENTS STARTER SET Ns 5.100 HEX PROSTHETIC KEY 1,2 mm (short and long) adapted for a torque spanner N 5.24 STARTER SET: - TORQUE SPANNER - 1 pcs. - HEX PROSTHETIC KEY 1,2 mm - 1 pcs. - HEX PROSTHETIC KEY 1,6 mm - 1 pcs. HEX PROSTHETIC KEY 1,6 mm (short and long) adapted for a torque spanner N 5.24 for fixing screw Ns 3.05, universal abutments Ns 2.78-2.93 SQUARE PROSTHETIC KEY 0,8 mm (short and long) adapted for a torque spanner N 5.24 FULL SET: - TORQUE SPANNER - 1 pcs. - HEX PROSTHETIC KEY 1,2 mm - 2 pcs. - HEX PROSTHETIC KEY 1,6 mm - 2 pcs. - HEX MANUAL KEY - 1 pcs. -...

ACCESSORIES ACCESSORIES TRANSFER COPING ASHLESS PLASTIC ABUTMENT IMPLANT ANALOG UNIVERSAL ABUTMENT (titanium) INDIVIDUAL MODELLING ABUTMENT FIXING SCREW FOR ABUTMENTS - base (titanium) FIXING SCREW FOR ABUTMENTS TEMPORARY ABUTMENT

SPHERICAL ABUTMENT KEYS FOR SPHERICAL ABUTMENTS SPHERICAL ABUTMENT STAINLESS STEEL HOUSING SPHERICAL ABUTMENT TITANIUM BASE FOR CAD/CAM

UNIVERSAL ABUTMENTS FOR ALL TYPES OF IMPLANTS length, mm for implants 0,5 1,5 0 3,5-4,0 ADDITIONAL INFORMATION MATERIAL INFORMATION The properties of unalloyed Grade 4 titanium for implants a) Chemical composition PLASTIC CAP (burning out abutment) c) Technical information Grade 4 titanium conforms to the ISO 5832-2 standard N 307 SCREW FOR UNIVERSAL ABUTMENTS

Using bone (or pike) cutter, shall be formed a direction for further location of bone cavity. 1500 rpm recommended. Using bone drill 2.5 mm diameter, bone cavity of appropriate diameter shall be formed. Not more than 1000 rpm recommended. Using a sphere burr, an optimal place on the alveolar bridge should be spotted. 1500 rpm recommended. Using a raspatory, mucosa shall be separated. Adequate anesthesia shall be applied. Then, at the top of the alveolar bridge, a cut should be made using scalpel. Then, using bone drill 2.75 mm or 3.0 mm diameter, bone cavity shall be widened. Then final...

NIKO DENTAL GmbH Kasseler Str. 47 34303 Bad Emstal, Germany Tel.: +49 69 57804972 http://ndimplants.eu mail@ndimplants.eu