Brief Introduction: The YP-90A Infant Incubator is designed to ensure the safety and comfort of newborns. It features two control modes, Air mode and Baby mode, both managed by a micro-computer. The incubator displays set temperature, air temperature, and baby temperature separately and includes passive humidification and adjustable bassinet inclination.
Specifications: The incubator operates on AC220V-230V/50Hz or AC110-120V/50-60Hz with a power requirement of 850VA. It offers a control range for air temperature from 25℃ to 37℃, with an optional override mode up to 39℃. The baby temperature control ranges from 34℃ to 37℃, with an optional override up to 38℃. The skin temperature sensor has an accuracy of ±0.2℃, and the temperature fluctuation is ≤0.5℃. The noise level inside the hood is ≤45dB(A).
Alarms and Connectivity: The incubator is equipped with multiple failure alarms, including over temperature, deviation, sensor failure, fan motor, power failure, and system alarms. It also features an RS-232 connector for data output and an oxygen input interface.
Standard and Optional Configurations: The standard configuration includes the main body, cabinet, temperature controller, hood, I.V. pole, and tray. Optional features include a temperature override mode, vertical height adjustment stand, weighing system, SpO2, and neonate bilirubin phototherapy equipment with blue LED.
Environmental Conditions: The incubator is designed to operate in an environment temperature of 20℃ to 30℃, with the set temperature at least 3℃ higher than the ambient temperature. The ambient air velocity should be less than 0.3m/s.
Packaging and Dimensions: The main body and cabinet are packed into two separate cartons. The dimensions for the main body are 1085mm x 640mm x 910mm, and for the cabinet, 1125mm x 665mm x 725mm. The gross weight is 63Kg for the main body and 68Kg for the cabinet.
Note: Specifications are subject to change without notice for performance improvement. The document was printed in April 2018, Version No. 2.