1. Catalogs
  2. Ningbo David Medical Device
  3. Infant Radiant Warmer - HKN-93A

Infant Radiant Warmer - HKN-93A

Infant Radiant Warmer - HKN-93A

Infant Radiant Warmer - HKN-93A

Product catalog summary
Overview: The HKN-93A Infant Radiant Warmer is designed to provide optimal thermal support for newborns. It features three control modes managed by a micro-computer: Pre-warm Mode, Manual Mode, and Baby Mode. The device allows separate display of set and baby temperatures and includes adjustable components for user convenience.
Key Features:
  • Adjustable warmer module and bassinet inclination.
  • Panels surrounding the bassinet can be turned outward or disassembled.
  • Includes an X-ray cassette under the bassinet and an APGAR timer.
  • Equipped with multiple failure alarm indications and an RS232 connector for data output.
Specifications:
  • Operating range: 18℃~30℃
  • Ambient air velocity rate: <0.3 m/s
  • Dimensions: L1100xW730xH1795mm (with stand); L1100xW730xH1795mm-H1935mm (with vertical height adjustment stand)
  • Weight: 105Kg (with stand); 140Kg (with vertical height adjustment stand)
  • Power requirement: AC220V-230V/50Hz or AC110-120V/50-60Hz, 750VA
  • Baby Mode temperature control range: 32℃-37.5℃
  • Skin temperature display range: 5℃-65℃
  • Accuracy of skin temperature sensor: ±0.2℃
  • Temperature uniformity of mattress: ≤2℃
  • Angle of heater head: 0°, 30°, 60°
  • Inclination of the bassinet: ±12°
  • APGAR timer alarms at specific intervals.
  • Failure alarms include over temperature, deviation, sensor failure, power failure, and setting alarms.
  • Total irradiance Ebi on the effective surface area: ≥0.66mW/cm²
  • Average bilirubin radiation on the mattress: ≥0.58mW/cm²
  • Bilirubin uniformity: >0.4
  • Dominant wavelength of blue light: 420-470nm
Standard and Optional Configurations:
  • Standard: Warmer module, bassinet, main column, mobile stand, controller, I.V. Pole and tray, phototherapy unit, breath resuscitation bag, infant head fixing unit, oxygen supplying set, low-pressure suction.
  • Optional: Disposable skin temperature sensor, Vertical height adjustment (VHA) stand, Storage drawer.
Environmental Requirements: The device is designed to operate within specified environmental conditions to ensure optimal performance.
Contact Information: Ningbo David Medical Device Co., Ltd, located in Xiangshan, Zhejiang Province, China. For inquiries, contact via phone, fax, or email as provided.
See more

Catalog excerpts

Infant Radiant Warmer - HKN-93A-1

HKN-93A INFANT RADIANT WARMER

 Open the catalog to page 1
Infant Radiant Warmer - HKN-93A-2

Brief Introduction Standard Configuration • Three control Modes: Pre-warm Mode, Manual Mode and Baby Mode control by micro-computer; • Set Temperature and Baby Temperature can be displayed separately; • Horizontal angle of warmer module and inclination of the bassinet can be adjusted; • The panels surrounded bassinet can be turned outward or disassembled; • X-ray cassette under the bassinet; • APGAR timer; • Multiple failure alarm indications; • RS232 connector for data output. Warmer module, bassinet, main column, mobile stand, controller, I.V. Pole and tray, phototherapy unit, breath resuscitation...

 Open the catalog to page 2

All Ningbo David Medical Device catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About MedicalExpo
MedicalExpo is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. MedicalExpo is an entity of VirtualExpo Group.