EtCO2 technology Moisture Management Technology Traditional Moisture Solution Nonin’s MedAir™ Revolutionary Moisture Solution MedAir created a unique “Flow-Thru” design that incorporates an advanced moisture water trap that eliminates air mixing: Mixed Air Exhaled air with water vapor Air mixing Moisture/Water Moisture must be removed from the sample tubing to achieve accurate measurements and to prevent contamination and damage to the device. Conventional water traps introduced additional problems when used to remove excessive moisture: P mixing – resulting in lower EtCO2 Air readings P Bulky external design – prone to breakage P Low volume – interrupted patient monitoring P capacity moisture trap High – Uninterrupted patient monitoring – Offers unmatched moisture control P Flow-thru design – Minimal air mixing – Accurate EtCO2 monitoring – Maximum moisture removal P Built-in design – Unobstructed – Minimizes leakage

EtCO2 technology MedAir’s simple, high-capacity moisture management system Our revolutionary “Flow Thru” design makes using capnography simple and effective. Whether it’s used in the pre-hospital, hospital or sleep lab setting, our moisture management system is the best, most cost-effective and simplest solution for today’s busy clinical environment. 1 Instruction for use: P Place the filter in the moisture trap as shown in 1 . 2 P Connect the moisture trap into position as shown in 2 . P Then press the moisture trap into position, by pushing the tab, as shown in 3 . P remove the moisture trap...