nora® nTx | nora systems 1 nora® nTx – Safe. Fast. Universal. THE REVOLUTIONARY QUICK INSTALLATION SYSTE

2 nora systems | nora® nTx Does this sound familiar? “I cannot allow ward areas to be closed for renovations.” Petra Günther, Head of the “Glück Auf” Nursing and Care Center, Benndorf “We are concerned that during the planned renovation, tearing out the old floor coverings could cause sustained damage to the subfloor.” Matthias Kopf, Director of Construction in the District Administration of Landshut Lower Bavaria “It is important to us that with new construction as little dust and dirt as possible is produced, and that we can use the new production hall as quickly as possible.” Ronald and Marcel...

nora® nTx | nora systems 3 The solution is called nora® nTx – this floor brings its adhesive strength along from the factory. With nora® nTx you can reduce installation time by up to 50% and can even carry out renovations during ongoing operations. Installation problems like bubbles, residual indentations, or seams belong to the past. Reliable installation result nora® nTx reduces installation problems: no bubbles, no residual indentations, no seams. Everything from a single source: 10-year-guarantee.* For all types of subfloors nora® nTx is suitable for all common types of subfloors – ideal also...

4 nora systems | nora® nTx

nora® nTx | nora systems 5 What is nora® nTx? nora® nTx is a new and unique technology for the professional installation of nora® rubber floor coverings. Ingeniously simple – nora® nTx brings its adhesive strength along from the factory. The flooring is cleanly and safely installed in only a few steps and immediately ready for use. And this can be done on the concrete or cement screed subfloors typical in new construction, as well as over other existing floor coverings. Even high residual moisture in the subfloor is not a problem for nora® nTx. nora® nTx | the system configuration under the criteria...

6 nora systems | nora® nTx How does installation with nora® nTx work? “Covering-over-covering” installation example with noraplan® nTx in the Meyer + Harre Interior Design office, Berlin Preparing the subfloor: sand, vacuum, and Apply the nora® nTx 020 primer; sand again and vacuum. 3 Install the flooring: remove protective film and attach the floor covering. Cut the flooring: roll out the flooring cut to fit. Allow floor to rest: the floor can be used immediately – without waiting. 4:00 p.m.: Finished All information and additional examples featuring the new nora® nTx installation technology...

nora® nTx | nora systems 7 Installation during ongoing operations – fast and safe with nora® nTx. Office space with in a new look, fast – installation directly on existing flooring All areas always accessible – Renovations in only two days Building: District administration building, Niederbayern Landshut; Installation: noraplan® valua nTx/unita nTx (1,000 m²) Building: “Glückauf” Nursing and Care Center, Benndorf; Installation: noraplan® sentica nTx (145 m²) nora® nTx self-adhesive rubber flooring is a very good solution, especially in buildings where a classic flooring system might damage the...

8 nora systems | nora® nTx nora® nTx is also a reliable and fast solution for d emanding new construction projects. Reliable and fast – even with high levels of residual moisture in the subfloor Building: SanaCare Gesundheitsprodukte GmbH & Co. KG, Alsbach-Hähnlein; Architect: Zimmermann Architects, Bensheim; Installation: norament® 926 grano nTx (500 m²) For a new production hall, SanaCare was looking for a hard-wearing, durable floor which is chemical-resistant and easy to clean. Because of the change needed to take place as quickly as possible, norament® rubber tiles were laid directly on...

nora® nTx | nora systems 9 High levels of planning security for complex construction projects with tight schedules. Simple application, secure application – Construction times cut in half Building: Reading Hospital, West Reading, Pennsylvania (USA); Architect: Ballinger, Philadelphia (USA); Installation: noraplan® eco nTx (22,500 m²) In the Reading Hospital (Pennsylvania, USA), an expansion building was opened at the end of 2016. The installation of a total of 22,500 m2 of noraplan® eco combined with nora® nTx laying technology brought decisive advantages. The self-adhesive rubber floor is equipped...

10 nora systems | nora® nTx r under the criteria indicated in y6arS our warranty warranty conditions*. * to be requested from our office nora® nTx guarantees safe installation results. nora® nTx | Comparison to conventional wet bonding 1) Proper laying time depends on the room temperature and the relative humidity, which in turn are influenced by external factors such as solar radiation. 2) For example cement screed > 2.0 CM%, calcium sulfate (anhydrite screed) > 0.5 CM%. The drying time for the levelling compound depends on the layer thickness, the temperature, and the relative humidity.

nora® nTx | nora systems 11 nora® nTx standard program (additional colors from the nora® standard program on request) noraplan® signa nTx

nora systems Shanghai Co. Ltd. 10 A/B, Long Life Building | 1566 Yan'an Road West | 200052 Shanghai, PR China Phone: +86 21 - 3226 0077 | Fax: +86 21 - 5258 1958 www.nora.com/cn nora systems GmbH (DMCC Branch) Office 3504, HDS Business Center | Cluster M | JLT | Dubai, UAE Phone: +971 (4) 450 8175 Fax: +971 (4) 450 8374 E-Mail: [email protected] www.nora.com/corp nora flooring systems UK Ltd. 4-5 Allerton Road | Rugby CV23 0PA, Great Britain Direct Dial Numbers: (01788) 513 160 Fax: (01788) 55 28 12 E-Mail: [email protected] www.nora.com/uk nora systems GmbH Hohnerweg 2-4 | 69469 Weinheim, Germany...