technical information noraplan® Conform to: ASTM-F-1344—Rubber Floor Tile ® ASTM-F-1859—Rubber Sheet Flooring without Backing ASTM-F-1860—Rubber Sheet Flooring with Backing 2.0 mm products: eco environcare sentica 3.0 mm products: degree environcare sentica nTx 2.0 mm products: eco environcare sentica nTx 3.0 mm products: degree environcare sentica acoustic products: environcare sentica ed products: environcare sentica Limited Wear Warranty (in years) Conductivity Warranty (in years) ASTM F1344 (tiles) Classication ASTM F1859 (rolls) Classication ASTM F1860 (rolls with backing) Classication Smoke Density ASTM E662 (both < 450) aming/non-aming CAN/ULC-S102.2 (Flame Spread/Smoke Developed) Static Coecient of Friction ASTM D2047 (dry/wet) Shore Hardness Type A ASTM D2240 Rolling Load Limit (lbs/psi) (1) Forklift Trac Critical Radiant Flux ASTM E648 (min ≥ 0.45) Suitable for Ramps Abrasion ASTM D3389 H-18 wheel 1.1 lbs load and 1000 cycles (< 0.035 oz required) Static Load Limit (Residual Compression) ASTM F970 with 800 lbs/psi Heat Resistance ASTM F1514, Require Avg. ∆E ≤ 8.0 Easily achieved with regular maintenance. Light Resistance ASTM F1515, Require Avg. ∆E ≤ 8.0 Sound Absorption E2179 (∆IIC only) Sound Generation Static Generation AATCC 134 (20% RH) Bacteria Resistance ASTM E2180 and ASTM G21 GREENGUARD Certied for Low VOC Emissions GREENGUARD Gold Certied for Low VOC Emissions Sound Absorption ISO 140 (∆ Lw only) Chemical Resistance Static Generation ANSI ESD S97.2* 1) The shape of the wheel’s contact surface must be at with rounded edges. No metal wheels. Shore hardness should be Յ 99, Type A. *Tested with conductive shoes. **Not tested. NOTE: Exact values may vary due to the test methods and tolerance between batches. The ASTM minimum requirement shall be achieved or exceeded. nora systems, Inc. 9 Northeastern Blvd. Salem, NH 03079 Toll free: 800-332-NORA Phone: (603) 894-1021 Fax: (603) 894-6615 E-mail: [email protected] www.nora.com/us Page 1 of 1