video corpo

miniDTS

miniDTS

miniDTS

Product catalog summary
Overview
The Mini Direct Transmission System (DTS) is designed for small labs and projects, providing a cost-effective solution for EMG and other biomechanical sensor data transmission. It directly transmits data from sensors to a USB receiver and is compatible with Noraxon's MR3 myoMUSCLE software and multi-device systems. The system can be upgraded with additional sensors like accelerometers and goniometers.
Key Features
  • Small, lightweight, and powerful, offering high fidelity at a lower cost.
  • Expandable from 4 channels to systems handling up to 32 channels.
  • Compatible with various biomechanical devices for synchronization.
Technical Data
  • Power and Synchronization: USB connection, TTL 5V sync input, powered by USB or wall plug.
  • Output & Transmission: Up to 2.5mW, 20-meter range, DSSS 2403-2472 MHz, no analog outputs, raw EMG data output.
  • EMG Sensor Data Acquisition: 16-bit resolution, selectable low-pass cutoff at 500/1000/1500 Hz, sample rates of 1500 or 3000 Hz, max 2 channels at 3000 Hz, max 4 channels at 1500 Hz.
  • EMG Preamplifier: No notch filters, high-pass filters at 10 Hz, baseline noise <1uV RMS, CMR > 100dB, input impedance > 100 Mohm, range +/- 6.3 mV, base gain 200, final gain 500.
  • Dimensions: EMG probe: 3.4cm x 2.4cm x 1.4cm, <14 grams; Receiver: 7.66cm x 10.18cm x 3.55cm, <120 grams.
Compatibility
The miniDTS system is compatible with surface or fine wire EMG and can sync digitally with Qualysis & Vicon systems. It automatically syncs with Noraxon devices or third-party analog signals.
See more

Catalog excerpts

miniDTS-1

Evidence-Based Biomechanics RESEARCH GRADE EMG FOR SMALL LABS AND PROJECTS

 Open the catalog to page 1
miniDTS-2

miniDTS PRODUCT DATA SHEET Release date: July 2015 Small On Size, BIG On Power The miniDTS was created as a direct result of a multitude of requests from the research community. They wanted something that was small, lightweight, powerful and with just as much fidelity as the big systems. The problem was their budget. Sometimes a research project or small teaching lab only needs 4 channels of EMG or just 2 accelerometers. The miniDTS is the solution to this conundrum as it offers all of these features at almost half the price of traditional research grade EMG systems. The miniDTS utilizes the...

 Open the catalog to page 2

All NORAXON catalogs and technical brochures

  1. Product catalog

    60  Pages

  2. Telemyo dts

    4  Pages

  3. desktop dts

    4  Pages

  4. myoRESEARCH

    30  Pages

  5. FDM - Plates

    2  Pages

  6. Clinical DTS

    4  Pages

Archived catalogs

  1. MR3

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.