TeleMyo 2400 G2 Telemetry System Wireless EMG and Sensor System 4 to 32 channel telemetry system Operates EMG and other biomechanical sensors Datalogger option via Flash Memory card Artifact-free and reliable WiFi data transmission Several receiver concepts with additional input/ output channels available Product Overview The TeleMyo™ 2400T G2 Transmitter is the latest generation of surface and fine-wire telemetric EMG systems that sends real-time EMG and other analog signals up to 300 feet (100 meters) by wireless transmission to a desktop computer or notebook. It combines high-quality, scientifically reliable data with mobility, flexibility and ease-of-use for clinicians, researchers, sports medicine professionals, ergonomists and athletic trainers. The default system includes a 4, 8, 12 or 16 channel transmitter unit, a USB based PC-interface receiver box, active pre-amplified leads, battery charger, and a belt clip and pouch for easy use. The default system comes fully equipped with four, eight, twelve, or sixteen active EMG leads. Mobile Computing EMG Angle/ Inclination Force Pressure Mobile Sensors Foot Switches Mobile Sensor Concept The option of purchasing an additional transmitter expands the system up to 32 channels for any combination of EMG and other analog signals. Virtually any analog sensor that is battery operated and works within +/- 5 volts can be connected directly to the system, such as foot switches and goniometers. In addition to the on-site preamplifiers, the "active leads" use Noraxon's patented signal amplifier technology, which provides clean, consistent and reliable data. The system can also be used as a datalogger when the WiFi board is exchanged with a flash memory board (up to 4GB). Noraxon U.S.A. Inc. • 15770 N. Greenway-Hayden Loop, Suite 100 • Scottsdale, AZ 85260 Tel: (480) 443-3413 • Fax: (480) 443-4327 • E-mail: [email protected] • Web S

TeleMyo 2400 G2 Telemetry System Receiver and Wireless Sync-Trigger Concept Noraxon’s second generation of telemetry systems (TeleMyo 2400T “G2”) offers a unique concept to receive and combine telemetric data with other biomechanical devices. Three models are introduced below, which can be upgraded at any time: 1. PC-Interface Receiver The default receiver is the PC-Interface Receiver. It can receive WiFi based telemetry data up to 32 channels and forward the data via USB to the PC. Due to USB functionality, it installs easily, bypasses the need for any Window network configuration and runs on...

NORAXON EMG & Sensor Systems TeleMyo 2400 G2 Telemetry System Unique Items • Noraxon's superior signal quality • Fully compatible to ISEK and SENIAM standards for surface and fine wire EMG • Expandable for any channel combination between 4 and 32 data channels • Exchangeable battery with 8 hours operation time • Unlimited time when used with a second battery. • Complete line of Plug-In sensors • Power to operate third-party sensors at each input port • General signal input range +/- 5 Volts • Two available digital channels for e.g. foot switch systems • Optional Fine Wire amplifiers with selectable...

TeleMyo 2400 G2 Telemetry System Transmitter Specifications Power Requirements • • 3.7V Lithium Ion rechargeable battery Includes a battery charger for 110-240 VAC 50/60 Hz Detachable battery cassette allows for virtually unlimited run time Unit does not need to be taken “out of service” to recharge batteries Smart battery technology for improved fuel gauging and monitoring the battery condition Single battery pack runs for up to 8 hours Output & Transmission Frequency Slide-In Battery Charger with condition and capacity monitor (Depending on country) • Up to 100 mW (depending on antenna and...