ASYMTEK Panorama S-Line Small Footprint. Superior Results. In today’s competitive marketplace, manufacturers face significant pressure to meet consumer demand with reliable products. Many new products are designed to work in extreme environmental conditions that can affect performance and reliability. Increasingly, manufacturers are moving to full conformal coating line solutions that combine coating, curing, and inspection capabilities with closed-loop process controls to meet demand and deliver consistent product reliability. The ASYMTEK Panorama™ S-Line delivers conformal coating process control in a compact footprint – with overlapping line processes that minimize manufacturing floor space use up to 50%. In this revolutionary patent-pending line layout, the lower compartment in each piece of equipment can include a curing or flash-off process. nordsonasymtek.com | +1.760.431.1

Customers need more than products, they need complete solutions and innovative partners. Nordson delivers on that promise with leading-edge equipment and technical expertise, from challenging applications to award-winning service and support. Panorama Line Solutions are designed to bring the right balance of equipment and process control for optimal conformal coating efficiency. Select the equipment and layout you need today, and scale with confidence as demand increases. Your ideal solution will depend on the type of board and application, the desired cycle rate, and coating material. With your...

ASYMTEK Panorama S-Line Equipment Options FX-940UV/FX-942UV Automated Coating Inspection Module General System weight 530 kg Width adjustment Board clearance (above and under) Maximum conveyor load Upper Deck Conveying height Conveyor speed Lower Deck Conveying height 550 mm below upper deck Conveyor speed Inspection set-up is fast and intuitive typically requiring less than 30 minutes. Capture up-to-the-minute process data with FIS/MES integration. When developing a new recipe, use the inspection system feedback to optimize a program for complete coverage. After the program is set up and verified,...

IR Cure ModuleGeneral Description System weight IR/IR 1140 mm, 690 kg; 1700 mm, 930 kg; 2260 mm, 1380 kg System weight IR/Flash-off 1140 mm, 650 kg; 1700 mm, 870 kg; 2260 mm, 1300 kg Width adjustment Automatic Board clearance (above and under) 100 mm Maximum conveyor load 4 kg/m Lower Deck Description Conveying height 550 mm below upper deck Configured as IR/IR or IR/ The ASYMTEK Select Cure® IR oven is ideal for top and bottom material curing in mid- to high-volume production environments. The Flash-off Module prevents Fhsh-°ff. bubbles and other defects like “orange peel” by allowing time for...

ASYMTEK Panorama S-Line Equipment Options Flip Module General System weight Flip Module/Flash-off System weight Flip Module/IR Width adjustment Board clearance (above and under) Maximum conveyor load Upper Deck Conveying height Conveyor speed Lower Deck Conveying height 550 mm below upper deck Conveyor speed Flips boards automatically to allow both sides of a board to be coated without operator intervention. Automatic one- or two-sided conformal coating reduces board handling requirements and increases yield. Manual Inspection Module Note: Configurations with UV and UV LED curing are available...

ASYMTEK Panorama S-Line Equipment Options X-View Module General System weight X-View/Flash-off System weight X-View/IR Width adjustment Board clearance (above and under) Maximum conveyor load Upper Deck Conveying height Conveyor speed Lower Deck Conveying height 550 mm below upper deck Conveyor speed The X-View Module uses top cameras to inspect the coating results during the flash-off process or after cure. The operator can monitor the results via the central line HMI. For optimized floor space use, the lower deck can be equipped with either a Flash-Off Module or an IR Module. Lift Module General...

Whether your production environment is low-, medium-, or high-volume, we’ll create a line solution that minimizes floor space usage and meets your throughput requirements. In standard conformal coating lines, product is handled in the upper deck area of inline equipment -leaving empty, unused space in the lower deck. The revolutionary Panorama S-Line design repurposes the lower deck area to accommodate additional process. This efficient use of upper and lower deck space results in significant footprint reduction - even in the most complex line configurations.

Reduce time-to-market, improve quality, and achieve consistency with conformal coating automation. The sample line solutions below feature coating, inspection, and curing capabilities. Use of the lower deck for curing means you don’t need to install a separate curing oven — IR and UV curing methods are available. Add an automated coating inspection module to capture images of final parts before unload.

ASYMTEK Panorama S-LineSample Line Configurations Lengths (mm)

Medium-Volume Production In medium-volume production environments, oven modules can be added to meet throughput requirements — IR and UV curing methods are available. The Panorama S-Line’s dual-deck design provides twice the heating length at a fraction of the floor space. The sample line solutions below introduce a range of inspection options to enhance production quality. A Reject Module can be added to provide additional process flexibility - allowing the line to continue while rejected parts are addressed.

ASYMTEK Panorama S-Line Sample Line Configurations

To meet quality and throughput targets, high-volume production lines rely on multiple coating and curing modules and a suite of inspection point locations - creating a critical need to balance manufacturing capability and floor space usage. The solutions below provide examples of more complex lines that include coating, inspection, and curing capabilities - all within an optimized foot print.

ASYMTEK Panorama S-LineSample Line Configurations<u £