Q2® Dual Port

Product catalog summary

Overview
The document describes the Q2® dual port extension set technology by Nordson MEDICAL, designed to enhance patient care through safe and accurate infusion therapy. The technology features a pressure-rated short port and a convenient side port, ensuring virtually zero residual volume and high flow rates.

Specifications

Compatibility: The device is T-shaped with two infusion ports and standard female luers that accept any needle-free connector.
Fluid Path/Priming Volume: The split septum has a straight fluid path with an approximate priming volume of 0.3 mL.
Q2® Displacement: The Q2® port has an average displacement of 0.028 mL.
Flow Rates: Vary depending on pressure:
- 1 psi: Q2® port - 232 mL/min, Microbore tubing - 63 mL/min
- 3 psi: Q2® port - 495 mL/min, Microbore tubing - 121 mL/min
- 5 psi: Q2® port - 659 mL/min, Microbore tubing - 168 mL/min
Pressure Rating: The Q2® port is pressure rated for infusion up to 325 psi and can be used with low-pressure power injectors.
Materials: The device is MRI safe and not made with the plasticizer Diethylhexyl Phthalate (DEHP).
Visibility: Clear visibility promotes complete and adequate flushing.
Activations: The Q2® port should be replaced after 100 activations.

Procedures and Recommendations
Users are advised to follow their organization's procedures and aseptic techniques when using the Q2® dual port extension set. The ExoFlex® line was developed to reduce infection risks and cater to multiple departments without breaking the line.

Contact Information
Manufactured by Quest Medical, Inc., located at One Allentown Parkway, Allen, Texas 75002-4211 USA. For inquiries, contact [email protected] or call +1.800.627.0226 / +1.972.390.9800.

Catalog excerpts

Our extension sets focus on safe and accurate infusion therapy delivery with minimal priming volumes and high flow rates. Our offerings include various tubing sizes and component options to ensure your patients are kept safe. Infection reduction was an inspiration in the development of our new ExoFlex® line, intended to address the needs of multiple departments while preventing a break in the line. • Pressure rated infusion port (325 psi) • Straight fluid path Nordson MEDICAL ADVANCING PATIENT CAREThe Q2® dual port extension set! technology contains a ipfessure rated short port and convenient side port, providing virtually zero residual volume and high flow rates.Always follow your organization’s procedures and aseptic techniqueFemale Luer Universally compatible! • Not pressure rated (use Q2® port) TubingClamp ONLY MADE IN USA Manufactured by Quest Medical, Inc. | | | | One Allentown Parkway , Allen, Texas 75002-4211 USA [email protected] | +1.800.627.0226 | +1.972.390.9800 © 2025 Nordson MEDICAL. Q2® is a trademark of Nordson MEDICAL. All rights reserved.

Open the catalog to page 1

All Nordson Medical catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list