Unit-Multi
8Pages

Multi-Unit Straight & Angulated Straight & Angulated Multi-Unit Abutments for screw retained restorations Noris Medical Ltd. 8 Hataasia st., Nesher 3688808, Israel T. +972-73-796-4477 | F. +972-4-965-0991 norismedical

Multi-Unit Platform Height Angulated Multi-Units Included with all multi-unit bases

The Multi-Unit system provides a solution for screw-retained prostheses even on complicated-to-restore implants (for example, multiple tilted implants). The Multi-Unit system comprises a full range of sizes for both the upper and lower jaws. Straight, 17°, 30°, 45°, 52° and 60° adaptors, in a variety of heights, connects to a wide range of complementary products. Material: Titanium (Ti6AI4V ELI) Multi-Unit Platform Height Included with all multi-unit bases Recommendation: Tighten the base at a torque between of 25-30 Ncm.

Multi-Unit Drivers Straight Multi-Unit Drivers Straight Multi-Unit Motor Mounts Short Motor Mount 2.0mm L 20mm NM-X1120 Long Motor Mount 2.0mm L 25mm NM-X1125 Star Hex. Motor Mounts Motor Mount 1.25mm L 20mm NM-X7008

Multi-Unit Components Passive Fit Castable Abutment Kit Wide Universal Abutment Ø 4.9mm H 12mm Included with all healing caps above & available separately Transfers & Analog Castable Sleeve Positioner Ø 4.9mm H 10mm NM-T7122 Included with all abutments above & available separately Screw* L 13mm NM-S7111 Included with the titanium base above & available separately The Passive Fit Castable Abutment Set consists of three parts aimed for the fabrications of accurate metal reinforced prostheses. The Castable Sleeve Positioner is used for locating the Castable Sleeve on the plaster model,...

Immediate Loading Laboratory Phase (Fabrication of the temporary bridge) Passive Fit Castable Abutment Kit 1 Assemble the Titanium Sleeve on the Multi-Unit base and tighten the screw at 15 Ncm. Mount the Plastic Sleeve on the Multi-Unit analog and tighten with the screw. The Passive Fit Castable Abutment Set consists of three parts aimed for the fabrication of accurate metal reinforced prostheses. The uniquely designed Castable Sleeve Positioner is used for locating the Castable Sleeve on the plaster model, ensuring passive fit of the fabricated metal cast when cemented to the Titanium...

Multi-Unit Protocol Assembly of a Straight Multi-Unit Base Assembly of Angled Multi-Unit Base Adjust the straight Multi-Unit Base to the implant by using the plastic handle. use the Angulated Guide Pin to choose the right correction angle. Adjust the Multi-Unit base to the appropriate angle. Use the handle as an indicator for the final screw emergence. Choose the desired impression technique: Tighten the base at 25-30 Ncm, with a 2.0mm Straight Multi-Unit Driver. For closed tray choose Snap-OnTransfer. Tighten the base at 25-30 Ncm, with a 1.25 mm Hex Driver or a Star Driver. 4 Remove the...

NORIS Medical ENGINEERED FOR HEALTH