Novapura AG • Blegistrasse 1 • CH-6343 Rotkreuz Press a button – get a clean room Room disinfection – up to now Rooms in hygienically challenging environments such as hospitals, retirement and nursing homes, laboratories, hotels, etc. must be disinfected on a regular basis. This is usually done by manual disinfection. The quality of the disinfection is thus left to the good will of the person who carries out the work. The disinfection process is also not documented in a consistent manner. Room disinfection – with aseptobot With the aseptobot, the quality of room disinfection is raised to a new and higher level. More than a decade of experience has gone into the development of the device. The most important properties and functions from the user's point of view: - fast – a room disinfection takes less than 60 minutes easy – the aseptobot can be safely operated with any smartphone. material compatibility – A disinfectant is used which is very effective and has a high material compatibility. documented– Even in the standard version, all treatments are completely recorded. The corresponding data can be easily visualized via a cloud solution. Quality assuring – By using innovative technologies, the full traceability of the disinfectants is guaranteed. flexible – Since the aseptobot is operated with a 24V battery, the operational flexibility is very high. The device can easily be moved from room to room. No cables are necessary. A whole range of additional functions and modules are being planned or are about to be implemented: - Expansion of the cloud solution: This gives the customer the option of implementing a disinfection management system tailored to his needs. Drivability: With an additional module it will be possible for the aseptobot to drive around in a room autonomously. UVC: This module allows the aseptobot to be used in a room occupied with people. The virus load in the room air will be reduced. This module works independentl

The application process In addition to a conventional smartphone, no further accessories are required. The application process is as follows: - Prepare the room - Adjust the aseptobot to the circumstances of the room, or get the room data stored under the room number in the device. You use a simple app on your smartphone for this - Scan the QR-Cord on the disinfectant canister - Leave the room - press the button on the app of your mobile phone! - The disinfection process is performed automatically. - The aseptobot reports to the operator as soon as it is finished. Important: The person who operates...