Mobile and precise measurement of relative humidity and temperature SET CONTAINS: > 1 carrying case for handheld device and probes > 1 handheld operation/display device ClimMate • 1 nSens-HT-ENS probe incl. nLink-UMB adapter > 1 nSens cable extension 2m > 1 USB-cable 1.8m > 4 batteries alkaline LR6 AA, 1,5V • 2 humidity standards Novasina SAL-SC 33 & 75%RH > 1 adapter SAL-SC for nSens probes > 1 short operating manual > 2 calibration certificates (abs.press / rel.hum. / temp.) • 1 x SmartGraph III PC software on CD ClimMate/nSens-HT 176 MULTI-FUNCTION INSTRUMENT FOR HUMIDITY/TEMPERATURE MEASUREMENT 167 Product description ClimMate display & operation unit Versatile measurement instrument for detection and display of parameters such as air humidity, temperature, absolute pressure, airflow, volumetric flow rate, CO2, water activity and more. The standard set consists of a nSens-HT humidity-0 temperature probe and can be optionally extended. The display and operation device includes a big colour touchscreen, an intuitive menu structure and an integrated 1 data logger function with 2 million data point storage. The ClimMate device can be connected to a PC by a USB interface and data can be downloaded, displayed and exported with the SmartGraph III software. This instrument is powered by 4 standard AA LR6 alkaline batteries or alternatively with a USB power supply unit. 113nSens-HT humidity-temperature probe An integral component of the system is the digital nSens-HT humidity/temperature probe which works over the 104whole measurement range with high accuracy and linear response characteristic. The calibration data are stored directly onto the sensor. The verification/calibration is performed by PC using the nSoft-CAL software. These plug-in probes are quickly replaced and the newly calibrated system may be put back into use again quickly, 86 maintaining highest accuracy. ClimMate unit • Colour touch-screen display with cursor • Data logging capability with 2 million data points storage • Climatic calculator • Integrated absolute pressure sensor • Various external probes available, e.g. CO2; airflow etc. • Battery powered or by USB power supply nSens-HT probe • Highest accuracy • Linear response characteristic • Hysteresis free • Intelligent, digital with calibration data storage • Plug & Play -4 °F • Building controls • HVAC plants • Process industry (e.g. chemical, pharmaceutical, semiconductor etc. • Paper-/textile industry • Building/construction maintenance • Storages, warehouses • Archives, libraries • Museums • Calibration laboratories • Test benches and many more... More information on the back side Novasina AG, Neuheimstrasse 12, CH-8853 Lachen, Switzerland Phone +41-55-642 67 67, Fax +41-55-642 67 70, e-mail: [email protected], www.novasina.com

Other external probes CO2 / rel. humidity (capacitive) / airflow Accessories nSoft-CAL calibration software / humidity generators Further information can be found in the Novasina general cataloge 005082.00 technical changes subject to change without prior notice Operation / display unit Novasina AG, Neuheimstrasse 12, CH-8853 Lachen, Switzerland Phone +41-55-642 67 67, Fax +41-55-642 67 70, e-mail: [email protected], www.novasina.com