A QUANTUM LEAP IN THE WORLD OF ACCURATE MEASUREMENT 167 Product description 158 149 140 QuantaDat Transmitter This modular designed transmitter ,with multi sensor technology, is used as a display and signal output unit with 4 sensor channels and 4 analogue outputs. This allows the management of 4 measurement points by only 1 transmitter. The sensor identification is made automatically and the channels can be assigned and configured using the onboard menu. The integral climatic processor (Mollier chart) enables display and output of values such as dew point temperature, absolute humidity, specific enthalpy, mixing ratio etc. An RS-485 interface is integrated as standard. Bus interfaces and relay switches can be assembled with modular configuration. nSens probe An integral component of the system is the digital nSens-HT humidity/temperature and nSens-T temperature sensor which work over the whole measurement range with high accuracy and linear response characteristic. The calibration data is stored direct onto the sensor. The verification/calibration is performed by PC using the nSoft-CAL software. These plug-in probes are quickly replaced on site and the newly calibrated system may be put back into use again quickly, maintaining highest accuracy. YOUR ADVANTAGES: Multisensor technology Transmitter manages several sensors Unique measurement accuracy +/- 0.5% RH and +/- 0.1K Process optimal measurement technology for stable & energy saving processes Ideal measurement characteristics for linear & hysteresis free control over the whole measurement range Characteristics QuantaDat transmitter Multisensor-Technology with 4 sensor channels 4 configurable analogue output signals Integrated climatic parameter processor Simulation function for fixed value output Graphical display with LED backlight Easy configuration by user-friendly device menu Simple Installation and set up Applications • Clean Rooms • HVAC plants • Paper-/textile industry • Meteorological stations • Greenhouses • Ripening chambers • Combustion- and drying-processes • Warehouses / storage units nSens probe • High measuring accuracy • Linear response • Digital sensor with calibration data storage • Software for verification and calibration by PC • Calibration labs • Test benches • Plant engineering & construction and many more... More information on the back side Novasina AG, Neuheimstrasse 12, CH-8853 Lachen, Switzerland Phone +41-55-642 67 67, Fax +41-55-642 67 70, e-mail: [email protected], www.novasina.com

Accessories nSens-Cable available in various lengths including mounting material nSoft-CAL PC-calibration software Further information the “QuantaDat/nSens - Overview Technical Data” document as well as the Novasina general catalogue is available 004881.01 technical data subject to change wiithout prior notice Novasina AG, Neuheimstrasse 12, CH-8853 Lachen, Switzerland Phone +41-55-642 67 67, Fax +41-55-642 67 70, e-mail: [email protected], www.novasina.com