FumeGard NU-162
4Pages

{{requestButtons}}

Catalog excerpts

FumeGard NU-162 - 1

FumeGard NU-162 conventional fume hood The FumeGard NU-162 is built primarily of stressrelieved polypropylene to which NuAire has added anti-oxidizing agents and UV stabilizers. This increases tensile strength and improves thermal characteristics. NU-162 has a single piece airfoil across the bottom of the work access opening. As the sash is lowered, the face velocity increases rapidly. Fumes, gases, vapors, aerosols, and particulate are drawn through vents by an exterior exhaust duct. “Double wall” construction forms the plumbing chase for routing and connecting all services. This compartment is under negative pressure to minimize fume build-up. NU-162 FumeGard has been independently tested to meet and exceed the requirements of ASHRAE Standard 110-1995 and is SEFA 1-1992 certified. Available in polypropylene, PVC, CPVC, Flame Retardant Polypropylene, PVDF, HDPE or Teflon® construction. 6

Open the catalog to page 1
FumeGard NU-162 - 2

FumeGard NU-162 Conventional Fume Hood Standard Features Optional Features • uperstructure Constructed from 1⁄2” (13 mm) Stress S Relieved, All Seam Welded Polypropylene • PVDF Lined Interior or Flame Retardant Polypropylene Fume Hood • All Negative Pressure Interior • Composition Stone/Modified Epoxy Resin Work Surfaces • Sealed Interior Fluorescent Lighting: 100 Foot-Candles (1076 LUX) • Air Flow Alarm Systems • Remote Controlled Service Valves for Air, Vacuum, and/or N2 Available in Polypropylene. Other Options Available upon Request. • Electronic Fluorescent Lamp Ballast •...

Open the catalog to page 2
FumeGard NU-162 - 3

NU-55 Fume Hood Base polypropylene fume hood bases The NU-55 Fume Hood Base is available as an option for NuAire polypropylene fume hoods. The NU-55 is constructed from long-lasting, corrosive-resistant, white polypropylene. The outer cabinet shell, kick panel, and shelves are constructed using 1/2 inch (13 mm) polypropylene. The rear access panels use The entire cabinet is totally seam welded and reinforced with polypropylene supports to ensure the cabinets' ability to withstand the weight of the FumeGard Fume Hood. All bases come with adjustable leg levelers with 11/4 inch (32 mm) maximum...

Open the catalog to page 3
FumeGard NU-162 - 4

FumeGard NU-55 Polypropylene Fume Hood Bases NU-55 4 ft Fume Hood Base Overall Dimensions Width (A) Height (B) Depth (C) NU-55 5 ft Fume Hood Base Overall Dimensions Width (A) Height (B) Depth (C) NU-55 6 ft Fume Hood Base Overall Dimensions Width (A) Height (B) Depth (C) NU-55 8 ft Fume Hood Base Overall Dimensions Width (A) Height (B) Depth (C)

Open the catalog to page 4

All NuAire Laboratory Equipment catalogs and technical brochures

  1. NU-543

    20 Pages

  2. NU-540

    20 Pages

Archived catalogs