WATER JACKET CO2 INCUBATOR The In-VitroCell ES (Energy Saver) NU-8600 series is a CO2 Incubator designed to deliver a reliable controlled In-vitro environment for optimum tissue cell culture growth by offering uniform temperature control by heating water surrounding the growth chamber, providing precise CO2 gas control, and minimizing potential contamination through HEPA filtration. Temperature Uniformity the growth chamber is surrounded by heated water and monitored using dual temperature sensor probes. Model NU-8600 offers temperature uniformity within 0.20°C at 37°C. CO2 Gas Accuracy - using a dual wave infrared (IR) sensor that is insensitive to other components, such as water vapor, the chamber maintains CO2 levels accurate within 0.1%. Growth Condition Recovery – Quicker and more stable, In-VitroCell CO2 Incubators recover gas and temperature back to set point faster than other CO2 Incubators. SET POINT Features Constant Contamination Control Closed Loop HEPA Filtration – Maintained at positive pressure, gas and air entering the growth chamber continuously pass through 99.99% @ 0.3 microns efficient HEPA filters producing an environment similar to an ISO Class 5 clean room slowing airflow to one chamber volume air change per 30 minutes to minimize cell dessication. Construction – The growth chamber is constructed of 16 gauge, type 304L polished stainless steel using a crevice-free design. The growth chamber walls are completely smooth with rounded corners which allow more complete contact between the chamber surface and cleaning solutions than a typical 90-degree corner. Shelving, supports and guide rails are easily removable and can be autoclaved or left in the chamber during a sterilization cycle. Copper Shelving and/or water pan (Optional) – add copper shelving and/or a water pan as an added defense against contamination. NuTouch Electronic Control System (ECS) – easily control system parameters with the touch of a finger. The NuTouch ECS is a user-friendly touchscreen LCD that allows for the control of parameters and offers status indicators, on screen instructions, and notifications to assist with proper use. Hypoxic Conditions – models NU-8631 provides the ability to suppress oxygen in the growth chamber by injecting N2 gas to meet set point by monitoring and controlling oxygen using a sensor. NuAire, Inc. | 2100 Fernbrook Lane | Plymouth, MN 55447 | U.S.A. | 763.553.1270 | www.nuaire.com © Copyright 2017. NuAire, Inc. All Rights Reserved. 20-1375

The NuTouch ECS offers on screen maintenance reminders such as filter replacement. Filters are easily accessible from the front of the CO2 Incubator Models Temperature Control CO2 Sensor RH (Humidity) Control O2 Control * Specify models with appropriate letter suffix for electrical specifications. "NU-5700E” for 230 VAC 50/60 Hz Shelving Size: 18” x 18 %" (457 mm x 476 mm)Supplied: 4 ShelvesMax. Capacity: 16 ShelvesMax. Weight Capacity: 25 lbs. (11.34 kg) per Shelf / 125 lbs. (56.69 kg) per IncubatorFeatures Standard Features NuTouch Electronic Control System Closed Loop...