NU-5700 CO2 Incubator
2Pages

{{requestButtons}}

Catalog excerpts

NU-5700 CO2 Incubator - 1

DIRECT HEAT CO2 INCUBATOR The In-VitroCell ES (Energy Saver) NU-5700 series is a direct heat CO2 incubator providing 5.65 ft3 (160 L) of useable space designed to deliver a reliable controlled In-vitro environment for optimum tissue cell culture growth. The chamber also provides an environment for the storage and preservation of gametes and animal tissue cell cultures at or near body temperature. Features Constant Contamination Control Closed Loop HEPA Filtration – Maintained at positive pressure, gas and air entering the growth chamber continuously pass through 99.99% @ 0.3 microns efficient HEPA filters producing an environment similar to an ISO Class 5 cleanroom. Dual Sterilization Cycles – 145°C dry or 95°C humidified, sterilization cycles help eradicate potential contamination threats when switching cell lines or performing routine cleaning procedures. Coved interior corners – A crevice-free interior is easier to clean eliminated potential growth areas within the chamber. CuVerro Antimicrobial Surfaces add CuVerro® Antimicrobial Copper Surfaces (optional) - to the incubator growth chamber and shelving to kill bacteria* to minimize potential contamination. CuVerro® is laboratory tested and EPA registered. CuVerro® Antimicrobial Copper Surfaces kill more than 99.9% of bacteria* within two hours, and continues to kill 99% of bacteria* even after repeated contamination and regular cleaning. Temperature Uniformity by wrapping the chamber with direct heating elements and monitoring the chamber with dual temperature sensor probes model NU-5700 offers temperature uniformity within 0.3°C at 37°C. CO2 Gas Accuracy - using a dual wave infrared (IR) sensor that is insensitive to other components, such as water vapor, the chamber maintains CO2 levels accurate within 0.1%. Growth Condition Recovery – Quicker and more stable, In-VitroCell CO2 Incubators recover gas and temperature back to set point faster than other CO2 Incubators. SET POINT SET POINT NuTouch Electronic Control System (ECS) – easily control system parameters with the touch of a finger. The NuTouch ECS is a user-friendly touchscreen LCD that allows for the control of parameters and offers status indicators, onscreen instructions, and notifications to assist with proper use. Hypoxic Conditions – models NU-5731 and NU-5741 provides the ability to suppress oxygen in the growth chamber by injecting N2 gas to meet set point by monitoring and controlling oxygen using a sensor. SET POINT Humidity Control – standard CO2 incubators create humidity in the growth environment by heating a water pan. Models NU-5720 and NU-5741 feature a reservoir to inject humidity into the growth chamber to meet set point monitoring and controlled by using a sensor. Disclaimer: Laboratory testing shows that, when cleaned regularly, CuVerro surfaces kill greater than 99.9% of the following bacteria within 2 hours of exposure: Methicillin-Resistant Staphylococcus aureus (MRSA), Staphylococcus aureus, Enterobacter aerogenes, Pseudomonas aeruginosa, E. coli O157:H7, and Vancomycin-Resistant Enterococcus faecalis (VRE). The use of CuVerro® bactericidal copper products is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. This surface has been shown to reduce microbial contamination, but it does not necessarily prevent cross contamination. CuVerro® is a registered trademark of GBC Metals, LLC and is used with permission. NuAire, Inc. | 2100 Fernbrook Lane | Plymouth, MN 55447 | U.S.A. | 763.553.1270 | www.nuaire.com *Set point to 90% plus 5% tolerance © Copyright 2016. NuAire, Inc. All Rights Reserved

Open the catalog to page 1
NU-5700 CO2 Incubator - 2

Size: 18" x 18 %" (457 mm x 476 mm)Supplied: 4 Shelves Max. Capacity: 16 Shelves Standard Features NuTouch Electronic Control System Closed Loop HEPA Filtration System 100% Stainless Steel Coved Interior Chamber Dual Temperature Sensor Probes Infrared (IR) CO2 Sensor Dual Sterilziation Cycles (NU-5710, 5720, 5731, 5741) Humidity Control System (NU-5720, 5741) O2 Control System (NU-5731, 5741) Four (4) Stainless Steel Shelves Eight (8) Stainless Steel Shelf Guides Four (4) Wall Brackets Heated External Right Hinged Door Swing (Field Reserveable) Inner Right Hinged Door Swing (Field...

Open the catalog to page 2

All NuAire Laboratory Equipment catalogs and technical brochures

  1. NU-543

    20 Pages

  2. NU-540

    20 Pages

Archived catalogs