Polypropylene Laboratory Equipment
28Pages

{{requestButtons}}

Catalog excerpts

Polypropylene Laboratory Equipment - 1

RUST-FREE, METAL-FREE PRODUCTS NuAire, Inc. | 2100 Fernbrook Lane | Plymouth, MN 55447 | U.S.A. | 763.553.1270 | WWW.NUAIRE.COM

Open the catalog to page 1
Polypropylene Laboratory Equipment - 3

Table of Contents FumeGard Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 – 9 NU-156 Vertical Laminar Airflow Fume Hood . . . . . . . . . . . . . . . . . . . . . . 4 – 5 NU-162 Conventional Fume Hood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – 7 NU-164 By-Pass Fume Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 – 9 Fume Hood Base Cabinets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 – 11 Acid Storage Cabinets. . . . . . . . ....

Open the catalog to page 3
Polypropylene Laboratory Equipment - 4

in the most demanding environments • Chemical Engineering • Electrical Engineering NuAire offers a wide variety of polypropylene laboratory furniture • Material Science and equipment. Products include the FumeGard vertical laminar • Environmental Toxic Analysis airflow fume hoods, FumeGard conventional and by-pass fume • Analytical Chemistry hoods, FumeGard base cabinets, FumeGard acid storage cabinets and a full line of polypropylene casework. All FumeGard hoods are • Water Treatment Facilities available in nominal 4, 5, 6, and 8 foot lengths; and 24” (610 mm) or 30” (762 mm) work surface...

Open the catalog to page 4
Polypropylene Laboratory Equipment - 5

THERMOPLASTIC MATERIALS Durable Polypropylene Construction and improve thermal characteristics. construction forms the plumbing chase Polypropylene is lightweight, stain services required [A, B], including NuAire Polypropylene products are absorption rate. All this makes the electrical outlets. The sloped constructed from primarily stress- NuAire polypropylene products an bottom polypropylene sink basin relieved, fully seam-welded, and excellent choice for long-lasting, and strainer are fabricated from reinforced white polypropylene. highly corrosive-resistant, metal-free The outer cabinet...

Open the catalog to page 5
Polypropylene Laboratory Equipment - 6

FumeGard NU-156 Vertical Laminar Airflow Fume Hood for High Acid and Trace Metal Analysis Use Constructed almost entirely of polypropylene, this fume hood contains the HEPEX™ Zero Leak Airflow System, available only from NuAire. The HEPEX™ system prevents uneven particulate loading by eliminating direct blasts to the HEPA filter, dispensing air over 100% of the surface. The system surrounds positive pressure airflow chambers and ducts with negative air pressure relative to the laboratory. This limits the possibility of leaks and guards against filter failure. The FumeGard NU-156 is designed...

Open the catalog to page 6
Polypropylene Laboratory Equipment - 7

FumeGard NU-156 Vertical Laminar Airflow Fume Hood Standard Features Optional Features • HEPEX™ Zero Leak Air Flow System • ULPA Filters: 99.999% Efficient on 0.12 Micron Particles • arge Separator-Less (Aluminum Free) HEPA Filters, L 99.99% Efficient on 0.3 Micron Particles • Remote Controlled Service Valves for Air, Vacuum, and/or N2 Available in PVC, PVDF, Teflon® or Polypropylene* • PVC Diffuser over Supply HEPA • Magnehelic Gauge to Monitor Supply Plenum Encased in Polypropylene Housing with Lexan® Window • 1⁄2” (13 mm) Stress Relieved All Seam Welded Polypropylene Work Zone •...

Open the catalog to page 7
Polypropylene Laboratory Equipment - 8

FumeGard NU-162 Conventional Fume Hood The FumeGard NU-162 is built primarily of stressrelieved polypropylene to which NuAire has added anti-oxidizing agents and UV stabilizers. This increases tensile strength and improves thermal characteristics. NU-162 has a single piece airfoil across the bottom of the work access opening. As the sash is lowered, the face velocity increases rapidly. Fumes, gases, vapors, aerosols, and particulate are drawn through vents by an exterior exhaust duct. “Double wall” construction forms the plumbing chase for routing and connecting all services. This...

Open the catalog to page 8
Polypropylene Laboratory Equipment - 9

FumeGard NU-162 Conventional Fume Hood Standard Features Optional Features • Superstructure Constructed from 1⁄2” (13 mm) Stress Relieved, All Seam Welded Polypropylene • PVDF Lined Interior or Flame Retardant Polypropylene Fume Hood • All Negative Pressure Interior • Composition Stone/Modified Epoxy Resin Work Surfaces • ealed Interior Fluorescent Lighting: 100 Foot-Candles S (1076 LUX) • Air Flow Alarm Systems • emote Controlled Service Valves for Air, Vacuum, and/or N2 R Available in Polypropylene. Other Options Available upon Request. • Electronic Fluorescent Lamp Ballast •...

Open the catalog to page 9
Polypropylene Laboratory Equipment - 10

FumeGard NU-164 By-Pass Fume Hood Constructed of stress-relieved polypropylene, the FumeGard NU-164 has a by-pass (protected by a grill) which maintains a constant volume of airflow. As the sash is closed, air is by-passed at the top of the hood, causing the hood face velocity to increase much more slowly than a conventional fume hood. A deflector vane across the bottom of the opening directs airflow across the work surface. This provides a permanent opening even when the sash is closed. Most of the exhausted air enters the fume hood through the by-pass. The eye-level Control Center has...

Open the catalog to page 10
Polypropylene Laboratory Equipment - 11

FumeGard NU-164 By-Pass Fume Hood Standard Features Optional Features • Superstructure Constructed from 1⁄2” (13 mm) Stress Relieved, All Seam Welded Polypropylene • PVDF Lined Interior or Flame Retardant Polypropylene Fume Hood • All Negative Pressure Interior • Composition Stone/Modified Epoxy Resin Work Surfaces • ir By-Pass for More Uniform Face Velocity During View A Screen Manipulation • Air Flow Alarm Systems • Sealed Interior Fluorescent Lighting: 100 Foot-Candles (1076 LUX) • Remote Controlled Service Valves for Gas, Air, Vacuum, Available in PVC, PVDF, Teflon® or Polypropylene* •...

Open the catalog to page 11
Polypropylene Laboratory Equipment - 12

NU-55 Fume Hood Base Polypropylene Fume Hood Bases The NU-55 Fume Hood Base is available as an option for NuAire polypropylene fume hoods. The NU-55 is constructed from long-lasting, corrosive-resistant, white polypropylene. The outer cabinet shell, kick panel, and shelves are constructed using 1⁄2 inch (13 mm) polypropylene. The rear access panels use 1⁄4 inch (6 mm) The entire cabinet is totally seam welded and reinforced with polypropylene supports to ensure the cabinets’ ability to withstand the weight of the FumeGard Fume Hood. All bases come with adjustable leg levelers with 1 1⁄4...

Open the catalog to page 12

All NuAire Laboratory Equipment catalogs and technical brochures

  1. NU-543

    20 Pages

  2. NU-540

    20 Pages

Archived catalogs