NF 200 Bench Top Centrifuge
2Pages

NF 200 bench top centrifuge is ideal for separation of blood samples, urine particle sedimentation and other routine applications in the laboratories. The body, lid and chamber of NF 200 is made of epoxy-polyester powder coated steel which means that the centrifuge is resistant to external and internal effects. With programmable microprocessor control system, the operations are accurate and reliable. There are two digital displays for speed/RCF and time. The centrifugal force (RCF) can also be programmed instead of speed.The use of the control panel is very easy and practical and there are no knobs for manual adjustment. NF 200 ensures mimimum increase of sample temperature by means of the continuous air flow system through the air channels in the lid. By means of the lid locking system, the lid can not be opened while the rotor is spinning and the program can not be started if the lid is open. The motor is protected against overheating. Quiet, direct drive and brushless induction motor does not require any routine maintenance throughout years of use. There is a pulse key for short cenrifugation requirements. The rotor spins as long as the key is pressed. NF 200 is delivered with angle rotor made of polypropylene and has capacity of 12x15 ml. There are also adaptors for 1.5/2, 5 and 7 ml tubes as well.

TECHNICAL SPECIFICATIONS NF 200 5.000 rpm 2.822 xg 12x15 ml Programmable Microprocessor Control System 1.000-5.000 rpm 10 rpm 1 - 99 min. and hold position 1 minute 230 V, 50/60 Hz 12 / 15 285x364x275 350x420x460 Maximum Speed Maximum RCF Maximum Capacity Control System Speed Set Range Speed Set Step Timer Set Range Timer Set Step Power Supply Net / Gross Weight, kg. Overall Dimensions (WxDxH) mm Packing Dimensions (WxDxH) mm ROTOR Rotor Type Tube Type 1.5/2 ml microtubes 7 ml vacuumed / non-vacuumed tubes 5 ml vacuumed / non-vacuumed tubes We reserve the right to modify the design and...