LAMINAR FLOW SYSTEMS
41Pages

HYGIENIC VENTILATION PRODUCTS

LAMINAR FLOW UNITS Laminar Flow Units are generally used in operating rooms and areas requiring hygienic environment. Through to the low turbulence and linear flow it provides, it is an important and mandatory equipment of the operating rooms as it protects the operation team and the patient. Laminar Flow Units are produced from stainless steel sheet in models with varying sizes and capacities. It can be manufactured according to the installation projects and can be produced with special designs instead. our units are manufactured in accordance with the standards, with the guarantee of...

General Specifications: Working Priciple: Laminar Flow Units are creats an air flow on the patient and in the operating room personel under them and provide protection against bacteria viruses and microorganisms by sweeping existing air. By that way the risk of inflection for people is reduced. If thinking about comfort conditions the human body is comfortable in the velocities of between 0,18-0,40 m/s. If the velocity of the air is fast as than the comfort velocities clearly that the patient would be influenceable. With that non setted velocities of the air flow it also influence the...

HEPA FILTER BOXES HEPA Filter boxes are part of hygienic ventilation systems and are generally used in clean production facilities, water and beverage filling facilities. The hepa filter boxes, which allow air to pass through the hepa filters without leakage, are produced from first class quality sheet as standard, RAL 9016 oven painted, and optionally from stainless steel sheet. In project elevation, test groove, side or top entry and flap models are used for the application area. Genaral Specifications: There are 3 types of hepa filter boxes producing in our production; • Side Inlet Hepa...

AIR FLOW UNITS Standard Side Inlet Hepa Filter Box Dimensions: Body Dimensions Diffusor Dimensions Flat Surface Hepa Filter Box Duct Connection

FAN FILTER UNIT Fan Filter Units are the units that purify the environment used in clean rooms with particles by means of recirculating working system. Fan Filter Units are manufactured from stainless steel and first class quality sheet with oven painted. It has models that can be changed filter from above or below upon request. Our fan filter units are produced with the guarantee of passing the tests of accredited institutions. Special design elements have been used to ensure high performance and increase energy efficiency in the mechanical parts. General Specifications: • First class...

PASS BOXES Pass Boxes are used to provide controlled passage of products in clean rooms. The Pass boxes, which ensure the safe transfer of products from the non-sterile environment to the sterile environment, can be produced in varying sizes upon request. Generally, the inner pass box chambers are manufactured from first class sheet with stainless steel and outer furnace painted. produced according to the project, can operate independently or independently of the ventilation system. General Specifications: • • Pass box unit with PLC software, magnetic lock, sensor, adjustable door opening...

CLASSICAL FILTER TYPE EXTRACTION HOOD GENERAL SPECIFICATIONS: Clasical genarally used in kitchens that require small amount of air flow. After passing the oily air getting out of the cooking unit through the filters on the hood, it throws out of the device it is connected to. There is a condensation pan around the hood as a standard so that the waste water accumulated on the hood can be discharged. It is produced from AISI 304 quality stainless steel as standard. It can also be produced from AISI 316 or Galvanized steel according to customer preference. The main elements are collected with...

DOUBLE HULL JET NOZZLE Double Hull Jet Nozzle is used in places with high ceilings and large areas requiring long distance shooting, to reduce the air homogeneously to the comfort zone (sports complexes, airports, atriums, factories, etc.). It is recommended to be used in horizontal air throwing applications. Double Hull Jet Nozzle inner circular part can be rotated around its axis by ± 30⁰ in 360⁰ vertical and horizontal axis. The blown air characteristics can be adjusted for summer and winter conditions. İnner circular part can be easly adjustable by hand and as an option addable an...

AIR FLOW UNITS Selection Parameters: Shooting Range 10 m

DOUBLE ROW BLADED GRİLL Double Row Bladed Grill is using for circulating the climated air in the area wich is air conditioning. İt suitable to be used in vertical and horizontal air throwing applications. The adjustable by using hand at the front side horizontal blades, for adjusting the air direction the vertical blades can be used. As a function of the adjustable that blades it gives you a way for changing the air direction in 4 different ways. Double Row Bladed Grill has been designed from two main part these parts are case and the double row bladed routers. The outside of the frame...

AIR FLOW UNITS Assembly Types: • • • • Screw Blind Case Cipped Latch Plenum Box With Latch Opposite Duct Damper Plenum Box Blind Case with Latch Grid Ceiling Clips

AIR FLOW UNITS 22 mm Blower Box: Selection Parameters Efective Area Table(m2)

AIR FLOW UNITS Pressure Loss and Noise Intensy Table by Air Velocity Pressure loss and noise intensity of the grill without damper. Pressure loss and noise intensity for the damper of the grill.

SINGLE ROW BLADED GRILL Single Row Bladed Grills used in ventilation and air conditioning systems to air suction dirty air from inside the room. İt is usable for vertical or horizantal working. It can also be used as a blowing grill. In this sitiation, the air flow is easily provided by the hand with a standard spaced aerodynamic structure with its horizontal wings in the front row. Single Row Bladed Grill has made from two main parts the first one is frame and the second part is single row blades the single row blade. Welded to the oblique angled junctions of the outer frame, then grinded....