video corpo

Statvac II

Statvac II

Statvac II

Product catalog summary
Overview: The O-Two Statvac® II is an oxygen-powered aspirator designed for emergency situations where there is a risk of airway compromise due to fluids or foreign materials. It effectively suctions excessive fluids or particulates from the oro/naso-pharynx.
Key Features:
  • Fast and effective fluid and foreign material removal.
  • Unique ON/OFF shuttle valve for quick operation.
  • Lightweight and durable with an anodized aluminum body.
  • Available with 8 oz or 12 oz collection jars.
Specifications:
  • Supply Pressure: 50 PSI (3.4 BAR)
  • Vacuum Pressure: 300mm Hg +/- 10%
  • Vacuum Free Airflow: 30 L/min +/- 15%
  • Maximum Gas Consumption: 20 L/min
  • Operating Temperature: -18 to 50°C (0 to 122°F)
  • Storage Temperature: -40 to 60°C (-40 to 140°F)
  • Weight: 5.6 oz (160 gms)
  • Dimensions: Diameter 3.0 in. (76mm) x Height 7.0 in (178mm)
Instructions for Use:
  1. Connect the gas supply hose to the DISS inlet and a 50 PSI oxygen supply.
  2. Turn on the oxygen supply.
  3. Attach suction tubing to the aspirator and secure the collection jar lid.
  4. Press the green shuttle button to start suction and ensure vacuum creation.
  5. Keep the collection jar upright to prevent blockage.
  6. Clear the suction catheter by covering the discharge port if blocked.
  7. Limit suctioning to five seconds to avoid depleting patient oxygen levels.
  8. Press the red shuttle button after suctioning to conserve oxygen.
  9. Repeat as necessary, emptying the collection jar as needed.
Cleaning and Disinfection:
  1. Rinse the aspirator jar with water and suction clean, soapy water through the aspirator.
  2. Turn off the gas supply, remove the hose, and dispose of the gasket and tubing.
  3. Wash the jar and lid in soapy water, rinse, and immerse in a cold liquid sterilant.
  4. Rinse thoroughly, inspect for damage, and replace parts as needed.
  5. Dry and reassemble, replacing the gasket.
  6. Test the aspirator for function and return to service center if not functioning.
  7. Replace suction tubing and catheter as required.
Ordering Information:
  • 01AS9500: Statvac II with 8 oz jar
  • 01AS9502: Statvac II with 12 oz jar
  • 17MP3051-cs: Replacement 8 oz jar (Case of 10)
  • 17MP3065-cs: Replacement 12 oz jar (Case of 10)
  • 17MP3052-cs: Replacement lid gasket (Case of 10)
Contact Information: O-Two Medical Technologies Inc., 7575 Kimbel Street, Mississauga, ON, Canada, L5S 1C8. Phone: +1 905 677 9410, Toll-Free: +1 800 387 3405, Fax: +1 905 677 2035, Email: [email protected], Web: otwo.com
See more

Catalog excerpts

Statvac II-1

O-Two Statvac® II Oxygen-Powered Aspirator Oxygen-powered suction on the move

 Open the catalog to page 1
Statvac II-2

O-Two Statvac® II When there is a risk of airway compromise from fluids or foreign material in the airway, the O-Two Statvac® II oxygen powered aspirator will effectively remove the materials and reduce the risk of aspiration. The O-Two Statvac II oxygen powered aspirator is capable of effectively suctioning excessive quantities of fluids or particulates from the patient’s oro/naso-pharynx. This lightweight aspirator is designed to be attached to any 50 PSI DISS outlet (other connections available upon request). The unique ON/OFF shuttle provides for fast actuation of the aspirator in an emergency....

 Open the catalog to page 2

All O-Two Medical Technologies catalogs and technical brochures

  1. CAREvent PAR

    2  Pages

  2. CAREvent ALS+

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.