ODU MEDI-SNAPHQini ^ fs> □ DU HIGH SPEED DATA TECHNOLOGY

APPLICATIONS • Lightweight • Medical • Easy installation and maintenance • Industrial • Space-saving design • Digital test and measurement • High chemical resistance • Fully sterilizable • Quick mating with push-pull locking • Easy-to-release break-away function • Disposable solution available All shown connectors and cable assemblies are defined without breaking capacity (COC) according to IEC 61984:2008 (VDE 0627:2009-11). Unless otherwise explicitly stated (for example: mains and high voltage), all shown connectors are rated to safety extra low voltage (SELV) of less than 50 V AC / 75 V DC,...

Clickable page numbers TABLE OF CONTENTS PRODUCT INFORMATION 5 ODU MEDI-SNAP® WITH PLASTIC HOUSING size 3.5 83

Break-away locking functionality ... . 8

PRODUCT INFORMATION From page

SUPPORT IN COMPLYING WITH THE LEGAL REQUIREMENTS FOR MEDICAL DEVICES Technical documentation Risk management Change management Management of CMR substances Continuous traceability Retention period for technical documents Supplier management Product information Product information

Product information PUSH-PULL LOCKING FUNCTIONALITY The proven push-pull locking ensures establishing connections easily in less than a second. It is self-securing – this means that an accidental release by pulling on the cable can be ruled out. During the mating process, the connector’s locking claws will lock into place in the corresponding grooves in the receptacle and form a dependable connection between the connector and the receptacle. Consequently, when the connection is properly established, an unintentional demating of the connection by pulling on the cable cannot take place. The connection...

PRODUCT FEATURES AT A GLANCE TURNED CONTACTS APPLICATIONS AND MATERIALS The ODU MEDI-SNAP® housings are available in PSU, PEI and brass. Standard color for the housings is Gray or Black. Additional colors for the housings are available in PSU, upon request. Color codings are available with up to 8 different colors. Turned contacts are available in diameter 0.5 mm to 2 mm in the following termination types: Solder, crimp and PCB The flexibility of the ODU MEDI-SNAP® series allows adaptation to suit a wide range of requirements in medical and industrial applications as well as in the digital measurement...

Product information

Product information Product information

Product information

CONFIGURATION GUIDELINE Connector and cable assembly configuration – step by step

STEP BY STEP TO THE PERFECT CONNECTION ODU offers high-quality connectors and comprehensive services for the complete assembly. From connectors to watertight potting, we provide the complete system from a single source. Cable collet Insulator with contacts Connector plug housing

YOUR WAY TO AN INDIVIDUAL CONNECTION:HOW TO CONFIGURE WITH THE PART NUMBER KEY. This shows you how ODU's part number key is composed. In the first part of the configuration, select the connector plug housing (such as style and size) of the connector. In the middle part of the part number key, you configure the contact insert and then the cable entry. A = Break-away connector G = Receptacle K = In-line receptacle S = Plug Insulator material Connector plug housing Size 1: p. 26 ff. / size 2: p. 62 ff. / size 3.5: p. 86 ff. Contact insert Cable entry Size 1: p. 53 ff. / size 2: p. 78 ff./ size 3.5:...

CONNECTOR CONFIGURATION - STEP BY STEP The perfect product for you in just a few steps. These step-by-step instructions show how to configure your own individual product with the ODU part number key based on a sample configuration. Connector in style 1 / size 1 / series ODU MEDI-SNAP® / coding 0° / connector plug housing plastic, Gray / insulator PEEK / 14 contacts / pin (solder) Au / termination cross-section AWG 28 / cable diameter 5.3-6.5 mm / standard back nut in the color Blue 1. STEP: SERIES (SEE POSITION 4) 2. STEP: STYLE (SEE POSITIONS 1, 2 AND 19) □OD STYLE S1 WITH STANDARD BACK NUT...

6. STEP: INSULATOR MATERIAL (SEE POSITION 8) 7. STEP: CONTACT INSERT (SEE POSITIONS 9 AND 10) 8. STEP: CONTACT TYPE / SURFACE (SEE POSITION 11) 10. STEP: TERMINATION CROSS-SECTION (SEE POSITIONS 13 AND 14) 11. STEP: CABLE COLLET SYSTEM (SEE POSITIONS 16 AND 17) MIN. CABLE DIAMETER 5.3 mm MAX. CABLE DIAMETER 6.5 mm

This shows you how ODU's cable number key is composed. In the first part of the configuration - after the ”C” for cable, please insert the first 6 positions of your connector number key. In the middle part of the cable number key, you configure the bend relief, color and count number. The last 6 positions determine the length of the cable in mm. Cable assemblyNo. of conductors Type of ODU connector Blue block identical with connector

CABLE SPECIFICATIONS TECHNICAL DATA SINGLE WIRE PVC Conductor Insulation Temperature range Test voltage Operating voltage TPC – tin plated copper acc. to EN 13602:2013 UL-PVC semi-rigid (UL-Style 1061 / 10002) UL-PVC 105 °C (UL-Style 1007 / 1569 & 1015) –10 up to +105 °C 1,500 V RMS (UL-Style 1061 / 10002) 2,000 V RMS (UL-Style 1007 / 1569) 6,000 V RMS (UL-Style 1015) 300 V RMS (UL-Style 1061 / 10002 & 1007 / 1569) 600 V RMS (UL-Style 1015) MULTI-CONDUCTOR CABLES PVC BLACK – UNSCREENED UL / cUL – LIYY STYLE 2464 / 2517-10002 Conductor Insulation Temperature range Test voltage Operating voltage...

SILICONE-OVERMOLDING New surface with unique haptics – no stick-slip effect Up to 500 autoclave cycles Bend protection thanks to special shape of overmolding Approved LSR and HTV processes available Maximum alternating bending strength Halogen- and latex-free PREVENTION OF THE STICK-SLIP EFFECT BEND PROTECTION AND SMOOTHLY TRANSITIONING OVERMOLDING

CABLE ASSEMBLY One point of contact for a complete system High technical expertise in the processing of third-party products 100 % final inspection Custom labeling and cable printing Close collaboration with leading cable manufacturers Process-controlled solder and crimp monitoring from initial samples to full production Cleanroom production possible in accordance with ISO 14644-1:2015-12 Production in accordance with UL possible (File: E333666) Inhouse Technology Test Center for the development of technologies for customer-specific requirements Production based on IPC standards