Lynx 12 Patient Monitor
2Pages

{{requestButtons}}

Catalog excerpts

Lynx 12 Patient Monitor - 1

Input dynamic range: ±(0.5mVp—5mVp) Differential input impedance: >I0MQ 0.5~40Hz (Monitoring) 1~20Hz (Operation) CMRR: >90dB (Diagnostic) >I05dB (Monitoring & Operation) Sensitivity selection: x|/4, x|/2, xI, *2, x4 an d Auto HR accuracy: ±1% or ±2bpm, whichever is greate Pacemaker pulse detection and rejection function Measuring accuracy: ±5% or ±2 rpm, whichever is greater Measuring accuracy: ±0.2 Cfrom 25—45 C Technique: Oscillometric method Typical measurement time : <30 seconds (adult cuff) NIBP measuring range : 40—200mmHg (Pediatric) NIBP measuring range: I0—I50mmHg (Pediatric) NIBP measuring range: 20—I65mmHg (Pediatric) 20—II0mmHg (Neonate) NIBP measuring accuracy: Mean difference: ±5mmHg NIBP measurement mode: Manual, Auto, STAT, Multi-cycle mode Auto measuring intervals: I-480min Technique: Dual-wavelength optical method Measuring accuracy: Arms is not greater than 2% for SpO2 range 70—I00%. PR measuring range: 30—250bpm PR measuring accuracy: ±2bpm or ±2%, whichever is greater Technique: Infrared optical method Sampling mode: Sidestream or Mainstream 4I~70mmHg ±5% of reading 7I~I00mmHg ±8% of reading I0I~I50mmHg ±I0% of reading Flow rate: 50ml/min ±I0 ml/min (Sidestream) Cerebral State Monitoring (CSM) EEG sensitivity: ±400pV CSI and update: 0-I00. filter: 6-42Hz, I sec. update filter: 75-85 Hz, I sec. update. BS%: 0-I00. filter: 2-42 Hz, I sec. update Technique: Strain gauge transducer Measuring accuracy: ±2% or ±4mmHg, whichever is greater ICP, AUXPI, AUXP2 Calibration: zero calibrating Cardiac Output (C.O.) Blood temperature measuring: range: 23-43 C, accuracy: ±0.5 C Injecta temperature measuring: range: 0-20 C, accuracy: ±0.5 C Measuring range: 0.2—20 L/min Measuring accuracy: ±0.2 L/min or ±I0%, whichever is greater Other Specifications Power supply:_AC I00V-240V, 50/60Hz, 60VA Built-in lithium battery: II.IV/4400mAh Display: I2.I inch TFT display Alarming method: 3 levels audible-visible alarm Networking: Ethernet Standard configuration ECG, Respiration, SpO2, PR, NIBP, Temperature Options 2-IBP, EtCO2, Nellcor SpO2, SunTech NIBP, I2-lead ECG Cardiac Output, Cerebral State Monitoring, CMS, Touch Screen Patient Monitor OES MEDICAL LTD OES Medical Limited ABC House, Cotswold Dene, Standlake Witney, Oxfordshire, OX29 7QG Tel: +44 (0)1865 301711 Fax: +44 (0)1865 301573 e-mail: exportsales@oes-medical.co.uk www.oes-medical.co.uk

Open the catalog to page 1
Lynx 12 Patient Monitor - 2

12.1” display with LED backlight 9-waveform on screen 360-degree visible indicator with 3-level alarm Patient Monitor Accessory box for standard configuration Integral 3-channel thermal recorder Li-ion battery up to 4 hours continuous monitoring Parameter case for optional parameters Comprehensive calculations for clinical application 12.1” high resolution display Touch screen optional 9 traces on-screen waveforms and maximal up to 13 User customized NIBP measuring cycles up to 5-phase Data export and software upgrade Versatile clinical calculations for application convenience HL7 protocol,...

Open the catalog to page 2

All OES Medical catalogs and technical brochures

  1. Astra

    4 Pages

  2. CYGNUS

    4 Pages