5383 PFPD Pulsed Flame Photometric GC Detector Compact and modular, the new, second generation 5383 Pulsed Flame Photometric GC Detector (PFPD) offers greater ease of use, design flexibility, and analytical refinement than its predecessor, while retaining the proven technology features that laboratories around the world rely on for accurate results. With a significant improvement in the signal processing and a 10-fold increase in sensitivity over most traditional FPDs, the detector makes accurate analysis of sulfur, phosphorus, and other elements easier than ever before. The intuitive, easy-to-use software suite with integrated monitoring and analysis capabilities provides a powerful tool for parameter optimization, data analysis, and more. Reliable and cost-effective, the 5383 PFPD uses significantly less gas than SCDs or FPDs and requires considerably less maintenance. PFPD Capabilities • Superior sensitivity and increased selectivity for S and P compared to conventional FPDs Linear, equimolar response for quick, easy calibrations Simultaneous mutually selective chromatograms (e.g., S+C, or S+P) The 5383 PFPD system consists of a detector assembly, controller, a manual or EPC-ready Pneumatics module, and the PulseView Monitoring and Analysis Software Suite. Principal Applications Sulfur in petrochemicals Self-cleaning design eliminates soot formation, or “coking,” seen in other sulfur-selective detectors Organophosphorus pesticides New, modular design with separate electronics and flow modules Better long-term stability and less maintenance than other S-selective detectors, such as SCD/XRF Flavor and fragrance analyses Simultaneous PFPD and MS detection Chemical warfare agents Organotin compounds Organometallic detection New! Intuitive, easy-to-use PulseView™ Monitoring & Analysis Software Suite Included with the detector, PulseView is a powerful tool for set up, training, optimization, data analysis, service and more. Explosives analysis P, S, As, Si detection (semiconductors) Sulfur

Electrometer; PFPD PMT 0-1,000 V 0-3.4 A PMT Protection Timed Events (from GC Remote Start) Controller Dimensions Pneumatics Module Dimensions Sensitivity Sulfur Signal-to-Noise >300 (at 10 pg S/sec elution rate peak- to-peak noise) Drift (S or P) <10x peak-to-peak noise in 20 min Phosphorus > 105 P/C (selectivity is adjustable with a One Signal In High Voltage Out Ignitor Current S/W HV Protection Autozero, range, attenuation, ignitor, mode or channel (e.g. S, P, C), and record 17.5 cm H x 6 cm W x 25 cm D (6.9" H x 2.4" W x 9.9" D) 17.5 cm H x 6 cm W x 27.5 cm D (6.9" H x 2.4" W x...