Model FM-4000XSD XSD MINICAMS and Controller MINICAMS® is an automatic transportable air monitoring system. It is designed for near real-time monitoring of volatile organic compounds (VoCs) and selected gaseous inorganic compounds in ambient air or other environments. It provides rapid notification of alarm levels in the monitored areas and operates continously with minimal maintenance. Based on capillary gas chromatography (GC), the MINICAMS is a fully quantitative analytical system capable of routine multiple-compound monitoring. the Halogen Specific Detector (XSD) is a highly-sensitive and selective detector for chlorinated compounds based on thermionic emission. Chlorinated compounds enter the high temperature reactor of the XSD, generating free chlorine atoms. these atoms are adsorbed onto an active platinum surface, which causes thermionic emission from the surface to generate a signal current. the XSD is a flameless detector, requiring only compressed air for detector operations. Proven, reliable technology for detecting chemical agents, precursors, simulants and selected toxic industrial compounds • Flameless detector • Small, lightweight, and simple to operate • Requires minimal routine maintenance • Small, stand-alone monitor for single or multiple sampling points in field applications; suitable for selected vehicle mounted applications • Plug-in GC module • Networking communications hardware for large installations • Interface available for Facility Control System • Additional data acquisition and report features available with the addition of CHROM-LINK® • Multiple-analyte monitoring (up to eight compounds per MINICAMS) O-I-AnalyticalCMS Field Products

Weight MINICAMS: Controller: MINICAMS: Controller: Sampling Options Solid adsorbent preconcentration Vertical PCT with fan for enhanced trapping efficiency and faster PCT cool-down Fixed-volume loop Eight available compound gates XSD Sensitivity Picogram to nanogram sensitivity for chlorinated compounds XSD Selectivity High halogen to hydrocarbon selectivity to reduce interference Suitable Calibration Standards Required Electrical Power - 120 VAC 50/60 hz Printer Strip-chart recorder 3 1/2” floppy disk drive Three RS-232 serial communications ports RS-485 port for communications with MINICAMS...