Polyeasy Thermoplastic Splint
16Pages

{{requestButtons}}

Catalog excerpts

Polyeasy Thermoplastic Splint - 1

ONESKY HOLDINGS LIMITED GUANGZHOU TIAN HONG MEDICAL TECHNOLOGY CO.. LTD.

Open the catalog to page 1
Polyeasy Thermoplastic Splint - 2

Company Introduction Onesky Holdings Ltd is a subsidiary of Biomedic (China) Meidcal Group. Biomedic (China) Medical Group is a comprehensive supplier of medical products in radiation medicine, interventional medicine, orthopedic etc. It is China's biggest supplier of radiation therapy products. Onesky is dedicated to the development, production and sales of immobilization medical device. Through continuous technology innovation it has 2 products available now, one for orthopedic fracture and soft tissue injury immobilization and the other one for body immobilization in surgical room. Both...

Open the catalog to page 2
Polyeasy Thermoplastic Splint - 4

Thermoplastic is a material which turns soft and moldable after heated in suitable temperature (65-70°C) and solidifies upon cooling. With this character it's an ideal material for fabrication of orthosis, external immobilization and rehabilitation aids. • Lightweight • High rigidity • Breathable with perforation • Latex-free • Good memory • X-ray transparency • Environment friendly 2%-Perforation Slight ventilation and comfort while keeping rigidity. 4%-Perforation Increased ventilation while still keeping major rigidity. 0-Perforation: Maximum rigidity and support. 10%-Perforation...

Open the catalog to page 4
Polyeasy Thermoplastic Splint - 5

With Coating: • Allows material to temporary bond to itself. Once cooled the bond is not permanent. • Normally easier for handling. • Can be removed to create a permanent bond by solvent or slightly scratching the splint surface. • Not stick to skin or cloths and no fingerprnint will be left. Without Coating: • Material is easy to stick to itself when heated. This is helpful at adding outriggers, accessories or reinforc

Open the catalog to page 5
Polyeasy Thermoplastic Splint - 6

Material type: Classic & Strong (All the above parameters can be combined freely) Heating time :1-3min Working time:2-6min

Open the catalog to page 6
Polyeasy Thermoplastic Splint - 7

• Offers good balance between maximum resistance to stretch, moderate drape and good conformability • Excellent rigidity ideal for medium and large splints • Shorter harden time saving time for therapists • Good memory allowing for re heating and re moulding • Edges trim easily Clinical Recommendations • Splints requiring firm handling • Functional resting and positioning splints • Upper and lower limb splinting, body jackets and back supports Size Available (All the above parameters can be randomly combined) Heating time :30s-2min Working time:1-3min 6

Open the catalog to page 7
Polyeasy Thermoplastic Splint - 8

Thumb Splint (Type I) Suitable for external immobilization for fracture of metacarpophalangeal joint, thumb phalanx, metacarpal and dislocation of carpometacarpal joint of thumb Thumb Splint ( Type II) suitable for external immobilization for fracture of thumb finger, acute arthritis of metacarpophalangeal, sprain of thumb, rheumatoid arthritis of metacarpophalangeal, sprain of central nervous in thumb functional site and rehabilitation after surgery between the thumb and the index finger Finger Splint Suitable for external immobilization for fracture of phalanx, dislocation of finger...

Open the catalog to page 8
Polyeasy Thermoplastic Splint - 10

Wrist Splint (Type II) Used for external immobilization for fracture of wrist joint or forearm distal, function site of wrist joint after orthopedic surgery, rest site of wrist joint lesions, lunate dislocation and Colies fraction. Thumb and Wrist Splint (Type I) used for external immobilization for tenosynovitis, tendon and nerve of radial muscle and thumb.

Open the catalog to page 10
Polyeasy Thermoplastic Splint - 12

Knee Splint Used for external immobilization for soft tissue injury of knee joint, fracture of patella, rehabilitation after knee joint surgery

Open the catalog to page 12
Polyeasy Thermoplastic Splint - 13

Drop Foot Type Splint External immobilization for dorsum of foot after tendon surgery, prop up the foot extension . Low Leg Splint External immobilization for fracture and injury of shank.

Open the catalog to page 13
Polyeasy Thermoplastic Splint - 14

Neck and Body Splint External immobilization for rehabilitation after cervical vertebra surgery or conservative treatment of serious cervical vertebra injury, upper thoracic fracture, subluxation and dislocation of cervical vertebra.

Open the catalog to page 14
Polyeasy Thermoplastic Splint - 15

This instruction shows the splint fabrication by Polyeasy,v Sheet (un-cut). For Polyeasy1" Pre-cut usage please refer to step 3-6. 2. Cut the thermoplastic sheet according to the outline on the paper. 4. When the sheet becomes completely transparent it indicates right state for use. Take it out and wipe the water with a towel. 5. Place the sheet on the body gently. Don't stretch the material too much because it may decrease the material strength.

Open the catalog to page 15
Polyeasy Thermoplastic Splint - 16

■w-ves ONESKY HOLDINGS LIMITED Add : 401, G10, South China Advanced Materials Innovation Park, No.31 Kefeng Road, Guangzhou Science City, Guangzhou, China P.C. : 510663 E-mail: oneskysales@biomedichk.com Tel : +86-20-38080269 Fax : +86-20-38080299

Open the catalog to page 16

All Onesky Holdings catalogs and technical brochures