ACCEL-VM100 Datasheet


Catalog excerpts

ACCEL-VM100 Datasheet - 1

Digital OR Room Solution ACCEL-VM100 HDMI/DP over IP Transceiver with USB Extension • Can be configured to function as either a Transmitter or a Receiver • IP switchable with minimum latency requires optional control center or control software • Ultra-light compression, lossless for most content • Extension up to 30km (maximum distance depends on the SFP+ module and type of fiber used) • Supports the use of an external control center or control software to provide expanded functionality 1 x HDMI (Type-A) 1 x DisplayPort 1 x HDMI (Type-A) 1 x 10GbE LAN (SFP+) 1 x Unbalanced Stereo (3.5mm) 1 x IR Extender (3.5mm) 1 x IR Blaster (3.5mm) 1 x RS-232 (3-pin Terminal Block) 1 x Ethernet (RJ-45) 3 x USB (Type-A) 1 x USB (Mini-B) Video HDMI Compliance HDMI 2.0 (DVI 1.0) Input Signal Types HDMI 2.0 / 4K@60, HDR10 / DisplayPort 1.4 HBR2 Input Port Output Port Bi-directional Port Digital Formats Analog Formats Line Level Pass-through Port Service Port Resolutions HDMI -Maximum Input DisplayPort Streaming -HDMI -Maximum Output Streaming - Power HDMI - 8CH LPCM, Bitstream, HD Bitstream DisplayPort- 8CH LPCM, Bitstream, HD Bitstream Unbalanced 2 Channel Frequency Response: < ±0.5dB (20Hz to 20kHz) THD: < 0.02% (20Hz to 20kHz) S/N Ratio: > 80dB (1kHz with 0dBFS) Crosstalk: < -80dB (10kHz, Vin=0dBFS) Power Supply Power Consumption Enclosure » ACCEL-VM100-N1-A1-0001 4K UHD+ HDMI/DP/USB over Fiber Transmitter/ Receiver(10Gbit/s SFP+) 2020.4.16 ^ All product specifications are subject to change without notice

Open the catalog to page 1

All Onyx Healthcare Inc catalogs and technical brochures

  1. ACCEL-VM500

    2 Pages

  2. MEDPC-9200

    2 Pages