For scaling-up and fully automating PCR setup and thermocycling For automation of 8 to 96 samples 1- & 8-Channel Pipettes Part number: 991-00356 For automation of up to 96+ samples 96-Channel Pipette ■ Robot, Pipettes, and Waste Chute ■ Temperature module and optional Thermocycler With the Flex PCR Workstations, you can automate your PCR setup and thermocycling at the scale you need to increase efficiency, reduce errors, and save hands-on time. Configure your workstation with our on-deck Thermocycler for end-to-end automation, or with no Thermocycler for automated PCR setup with off-deck thermocycling. This workstation can be used for the following applications: *Workstation can be used to automate 96 samples of PCR setup and on-deck thermocycling, or 192 samples of PCR setup (i.e., with off-deck thermocycling). JULY 2025 © OPENTRONS 2025, ALL RIGHTS RESERVED.

OPENTRONS FLEX PCR WORKSTATION Opentrons Flex Robot Opentrons Flex Gripper GEN1 Opentrons Flex 1-Channel (1-50 pL) Opentrons Flex 96-Channel (1-200 pL or 5-1000 pL) Temperature Module GEN2 with Opentrons Flex Caddy Opentrons Flex Waste Chute GEN2 Opentrons Flex Filter Tips, 50 pL 2.0 mL Microcentrifuge Tubes (2000 count) 200 pL Full Skirt 96-Well PCR Plate (25 count) Customize your Flex PCR Workstation to fit your workflow by adding on any of the following modules at 10% savings. ■ Thermocycler GEN2 with Opentrons Flex Caddy ■ 2nd Temperature Module GEN2 with Opentrons Flex Caddy ■ Opentrons...