PTU Gamma/2 - Patient transfer unit
15Pages

FIXED PATIENT TRANSFER UNIT

Technology, Safety and Comfort for the health of patients The fixed patient transfer unit “Gamma 2” has evolved with all the knowledge, expertise and know-how of OPT SurgiSystems gained in more than 100 years of experience in the medical sector. This brand new system allows to transfer the patient in the operating department before and after a procedure in a safer, more comfortable and smooth method. In this way, the patient and the hospital staff are prevented from the potential injuries handling the patient weight during a manual lifting and it organizes the access to the operating...

TRANSFERRING SEQUENCE Transferring a patient from a stretcher to the operating table and vice versa is a daily operation in an operating department that can imply difficulties and problems for both patient and OR staff. By using the patient transfer unit “Gamma 2” such operation can be done also by only one operator, in all safety and ease. The patient transfer unit “Gamma 2” allows transferring the patient both with single movements and in a sequential way with prearranged procedures. 1. The stretcher with the patient is moved closer to the patient transfer unit “Gamma 2”, adjusting the...

Safety is a priority in drawing and manufacturing OPT products. The attention is focused both on the safety and ease of the patient during the complicated passage from the bed to the operating table with drainage tubes, drip-feed, etc. (and vice versa) and on the safety and ease of the operator in this complicated operation. Times for transferring the patient are reduced and so is the patient’s strain. The operator can be helped by the patient transfer unit “Gamma 2” in the different passages of loading and unloading the patient thanks to safety and control systems in order to avoid dangers...

The patient transfer unit “Gamma 2” has been conceived to offer the best comfort for the patient during pre- and post-operative transfers in the operating department. We have focused our attention on this aspect, being aware of the patient’s emotional state both before a procedure and the confusional state after it. Therefore “Gamma 2” ensures delicate, constant and linear movements both during the loading and the unloading of the patient with its conveniently calibrated speed in order to avoid sudden movements. All electro-mechanical movements are operated by the system through...

TECHNICAL FEATURES Used materials The patient transfer unit “Gamma 2” is composed of a single unit of high quality steel with stainless surfaces (with removable panels for maintenance operations). The patient transfer unit “Gamma 2” is completely latex free. Commands of the system The patient transfer unit “Gamma 2” is movements are managed by two wired manual remote controls (n. 1 remote control in the “clean” zone, while the other one is in the “dirt” zone). Depending on the model, it can have two more I.R. remote controls (one for the “clean” zone and one for the “dirt” zone). Through...

Heated table top (optional) The PTU can have a heated table top for a better patient’s comfort. Patient detecting system (for PTU with window) Sensors to detect the patients on the borders (and/or obstacles of every kind) that prevent the contact with the closing window during the transfer. Once the obstacle has been detected, sensors stop immediately the closing window and make it re- open to its maximum height. Manual emergency movement (optional) Emergency system that in case of problems with motors and/or absence of electricity allows the manual slide of the transfer table top. Manual...

The patient transfer unit “Gamma 2” without window VERSION “WITHOUT WINDOW” The patient transfer unit “Gamma 2” is available in two versions “without window” and “with window”. The closing window of the PTU version “with window” allows the patient transfer unit to separate the “clean” zone (operating department) from the “dirt” zone, before and after the patient’s transfer with clear advantag

TECHNICAL DATA AND DIMENSIONS Patient transfer unit with window • Load transfer table top height adjustable: • Useful length of the table top: • overall dimensions of the table top: • Passage light of the load table top: • Supply voltage: • • • • • • 620 – 1.030 (mm) 1.880 mm. 1.925 mm 2003 mm. AC 230 V – 50 Hz AC 100-110 V (optional) Nominal power input: 2.000 VA Protection against electric shock: Class I Protection against direct and indirect contacts: Type B equipment Degree of protection against harmful ingress of water: IPX4 Load capacity: 220 kg patient’s weight Weight: kg 695 Patient...

OPT SurgiSystems S.r.l. Single shareholder company, subject to management and coordination of TKB Corporation, Tokyo, Japan Via Cesare Battisti, 17 - 38060 CALLIANO (TN) – ITALY Tel. +39 0464 834336 - Fax +39 0464 835142 www.opt-ita.com OPT SurgiSystems S.r.l. reserves the right to make technical modifications without prior notice