1. Catalogs
  2. Optergo AB
  3. User manual for Flip-up loupes

User manual for Flip-up loupes

User manual for Flip-up loupes

User manual for Flip-up loupes

Product catalog summary
Introduction
Congratulations on choosing flip-up loupes tailored to your personal specifications and optimal working posture. It is recommended to start using them in relaxed work situations to get accustomed to the new optical solution. The loupes can be easily flipped up when not needed, allowing you to maintain an ergonomic posture.

Flip-up Function
When in use, the loupe cones should be flipped down to touch the eyeglass lenses or frame edge. Use the cleanable grip point in the middle of the metal structure to flip the loupes up and down.

Adjusting Hinge Friction
Ensure the correct tension so that the loupes stay in place in both up and down positions. Use the provided screwdriver for adjustments, but avoid over-tightening.

Attaching and Detaching the Loupes
The loupes can be attached or removed from the spectacles only when in the upright position. Support the mounting knob when attaching and pull the hinge upwards when detaching.

Fine Tuning the Working Distance
The loupes are pre-adjusted for optimal working distance but can be fine-tuned by rotating the back lenses. Adjustments should be made in quarter-rotations, with specific changes in distance depending on the loupe model (EASY, ERGO, ENDO, ENSI).

Cleaning
The loupe system is easy to clean with the included microfiber cloth. The loupes are not fully waterproof but can be wiped with a moist cloth. For thorough cleaning, detach the loupes and wash the spectacles separately. Recommended detergents include common spectacle cleaners and dish soaps.

Disinfection
The loupes can be disinfected by wiping with alcohol up to 70%. They should be used and stored at room temperature and humidity. Avoid immersing in water or placing under running water.

Additional Information
For more details, visit www.meridentoptergo.com. The loupes are designed and handcrafted in Finland, with worldwide patents and patents pending.
See more

Catalog excerpts

User manual for Flip-up loupes-1

User manual for Flip-up loupes Congratulations on a good choice! The loupes and glasses are tailored to match your personal specifications and optimal working posture. A new optical solution may require some getting used to so start by using it in unhurried work situations. You can maintain your ergonomically optimal working posture by manouvering the patient and the loupes are always easy to flip up when not needed. Please study this manual to get the best out of your loupes.

 Open the catalog to page 1
User manual for Flip-up loupes-2

Flip-up function When in use, the loupe cones should be flipped down so that they touch the eyeglass lenses or frame edge. Flipping up and down Touch only the easily cleanable grip point (middle of the metal structure) when flipping the loupes up and down during work. Adjusting hinge friction Correct tension is achieved when the loupes stay in place in both up and down positions. Use the provided screwdriver for adjusting. Do not tighten too much. Attaching and detaching the loupes The loupes can be attached onto and removed from the spectacles only when turned into the upright position. Attaching...

 Open the catalog to page 2
User manual for Flip-up loupes-3

Fine tuning the working distance The loupes are ready adjusted to your ergonomically optimal working distance. However, you may need to fine tune the distance later for practical reasons. Exact adjustment of the working distance will prevent eyestrain and enables you to fully utilize the depth of field offered by your chosen loupe model. Adjust the working distance by rotating the loupes’ back lenses  Detach the loupes from the spectacles.  Grip the loupe cone and attach the plate tool into the grooves.  Rotation: clockwise (+) will increase and counterclockwise (-) will decrease the working...

 Open the catalog to page 3
User manual for Flip-up loupes-4

Cleaning Thanks to its simple structure the loupe system is easy to clean. The included microfiber cloth can be used for cleaning both glasses and loupes. Due to the distance adjustment mechanism the loupes are not fully waterproof but can still be wiped with a moist cloth. The eyepiece lenses embedded in the loupe cone are best cleaned with a cotton swab. For a more thorough cleaning, detach the loupes from the glasses and wash the spectacles separately. Recommended detergents  Common spectacle cleaners  Dish soaps (as water solutions) Avoid detergent leftovers in the spectacle knob and loupe...

 Open the catalog to page 4

Archived catalogs

  1. DeLight LED

    5  Pages

  2. MO Leaflet

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.