Catalogs >
ORMESA >
OBI

OBI
3Pages

Catalog excerpts

Product Certified by the Following Institute CERAH France Product Registered The copyright even if partial is forbidden without any authorization of the manufacturer. The manufacturer reserves the right to introduce any changes without prior notice. CRASH TESTED for the forward-facing transport of the pushchair in a motor vehicle (private vans/cars, buses..) CRASH TESTED according to the ISO 7176/19 WARNINGS: - fits the ISO 10542 compliant 4-POINT STRAP-TYPE TIEDOWN, provided by the vehicle Product Marked - it is required for the child to wear both pelvic- and shoulder-belt-type restraints, to be compliant either with ISO 7176-19 or ISO 10542. Postural belts and harnesses such as our 828, 853 and 894 are not approved for the use as an occupant restraint system, but they can be used in addition Authorized Dealer design and quality MADE IN ITALY since 1980 - the vehicle must be suitable for transporting orthopedic pushchairs in compliance with current law - read the warnings and instructions given in the user’s & maintenance book COMPANY WITH QUALITY MANAGEMENT SYSTEM CERTIFI

Open the catalog to page 1

- Steel and aluminium folding frame, painted with non-toxic epoxy varnish - Trevira, padded, fire-retardant and removable upholstery, machine washable at 30° - Chassis made of natural-looking “cordura du pont” nylon, hard-wearing, washable technical features 835 Headrest with two side elements, which can be used one at a time (either the left side or the right side) 812 Wheel direction locks 824 Table with edge and hollow 825 Rain cover (the rain cover can only be attached after the canopy 819) 1 - slots for headrest 2 - slots for harness (853) 3 - side protections on the frame 4 - slots...

Open the catalog to page 2

Product Certified by the Following Institute CERAH France Product Registered CRASH TESTED according to the ISO 7176/19 WARNINGS: - fits the ISO 10542 compliant 4-POINT STRAP-TYPE TIEDOWN, provided by the vehicle Product Marked - it is required for the child to wear both pelvic- and shoulder-belt-type restraints, to be compliant either with ISO 7176-19 or ISO 10542. Postural belts and harnesses such as our 828, 853 and 894 are not approved for the use as an occupant restraint system, but they can be used in addition Authorized Dealer design and quality MADE IN ITALY since 1980 The copyright...

Open the catalog to page 3