• Dimensions: 800 x 1940 x 946 mm (W x H x D)
• Weight: 600 Kg
• Power Supply: 230 VAC ± 10%, 1+N phase, 50/60 Hz, 4.5 kW (6 kW with accessories)
• CNC Handling: 165 N/cm in X-Y-Z axes
• Cutting Power: Average 300 W, 450 W; Max Peak 3000 W, 4500 W
• Spot Size: 0.1 mm / 50 μm for cutting/marking
• Laser Class: Class 1 (closed), Class 3R (open)
• Engraving Area: 110 x 110 mm [x2]
• Sheet Width: Min 20 mm - Max 125 mm
• Cutting Area: X=200 mm, Y=110 mm
• Max Axis Stroke: 225 - 120 - 144 mm in X-Y-Z
• Rapid Feed Rate: Max 10000 mm/min
• Axis Acceleration: Max 2 m/s²
• Positioning Accuracy: 0.01 mm
• Pneumatic System Pressure: 7 bar
• Air Compressor Capacity: Minimum 160 l/min
• Cutting Gas Inlets: 3 available, max pressure 16 bar

The TDL 500 is an integrated laser marking and cutting system designed for mass production, excelling in processing precious metals, steel, and other alloys with cuts up to 4 mm thick. It features a CNC head for precise perpendicular cuts and allows simultaneous cutting and marking on the same workpiece using dual laser sources.

• High Cutting Definition: Achieves precise cuts with reduced processing time due to one-pass cuts.
• Maximum Productivity: Continuous operation is supported by an integrated chiller and plate decoiler.
• Material Recovery: Enhanced metal recovery through a combination of laser beam, gaseous jet, and high-performance suction system.

• Air Drier
• Plate Decoiler
• Dust Recovery System

For more details, visit orotig.com or contact [email protected].