VITROS® 250/350 Chemistry System Site Specifications - 6 Pages

Add to MyMedicalExpo favorites
VITROS® 250/350 Chemistry System Site Specifications

Catalog excerpts

Site Specifications Ortho-Clinical Diagnostics

 Open the catalog to page 1

Export authorized under general license GTDA (General Technical Data Available) IMPORTANT The information contained herein is based on the experience and knowledge relating to the subject matter gained by Ortho-Clinical Diagnostics, Inc. prior to publication. No patent license is granted by the information. Ortho-Clinical Diagnostics, Inc. reserves the right to change this information without notice, and makes no warranty, express or implied, with respect to the information. The company shall not be liable for any loss or damage, including consequential or special damages resulting from the...

 Open the catalog to page 2

12 Specifications Environmental Requirements Operating Environment Altitude Sea level to 8000 feet (2400 meters) Temperature and Humidity The environmental limits for normal operation of the analyzer are shown below. 29.4° C (85° F) 25.6° C (78° F) Temperature 108 grains/lb (3.17 grams/ meter) (Grains of moisture per pound of dry air) Operating Characteristics Heat Output 4100 BTUs per hour Noise Output Acoustic Emissions Scale dBC (Europe) VITROS 250/350 Chemistry System - Operator’s Manual

 Open the catalog to page 3

Specifications Requirements at Customer Site Requirements at Customer Site A telephone should be available within the area so the operator can access the analyzer when using the telephone. No direct air flow within 305 cm (120 inches) of the analyzer. Minimum width of 76 cm (30 inches). Laboratory Computer Interface See publication Part No. 355283, “Specifications for Laboratory Computer Interface.” Parts Storage Area Minimum space: Length 60 cm (2 feet) Width 60 cm (2 feet) Height 25 cm (10 inches) VITROS 250/350 Chemistry System - Operator’s Manual

 Open the catalog to page 4

Specifications VITROS 250/350 Chemistry System and Printer Specifications VITROS 250/350 Chemistry System and Printer Standard Printer Other Printer Specifications Analyzer Specifications Installation Specifications for the VITROS 250/350 Chemistry System Description 272 kg (600 pounds) 115 cm (45.5 inches) 71 cm (28 inches) 120 cm (47 inches) 171 cm (67 inches) Description 76 cm (30 inches) 76 cm (30 inches) 30.5 cm (12 inches) 267 cm (105 inches) *With standard printer. Other printers may require additional space. NOTE: The other printer may be located to the left of the analyzer if...

 Open the catalog to page 5

Specifications Electrical Requirements Electrical Requirements Receptacle Specifications for the Analyzer Description 30.5 cm (12 inches) minimum 61 cm (24 inches) maximum 120 cm (48 inches) maximum The standard printer plugs into the receptacle on the back of the VITROS 250/350 Chemistry System (lower left corner of the slide processor as you face the back of the analyzer). The printer comes with a double-ended female cord to accomplish this. Electrical Specifications for the Analyzer The VITROS 250/350 Chemistry System will operate on • 100–120V, 50 or 60 Hz OR • 200–240V, 50 or 60 Hz...

 Open the catalog to page 6

All Ortho Clinical Diagnostics catalogs and technical brochures

  1. ORTHO ProVue

    6 Pages

  2. VITROS® 350

    2 Pages

  3. Pathology

    4 Pages

Archived catalogs