VITROS® 5600: Specifications Sheet
2Pages

VITROS® 5600 Integrated System1 Specifications Sheet • Measurement Principles: + Colorimetric/Rate + Potentiometric (direct ISEs) + Immuno-rate + Turbidimetric + Enhanced Chemiluminescence • Reagents: + No preparation,* no mixing or reconstitution required for Integrated Reagent Packs, Signal Reagent, Universal Wash Reagent, Electrolyte Reference Fluid (ERF), or Immuno-Wash Fluid (IWF) + Onboard stability up to 84 days + Shelf life stability up to 18 months from date of manufacture** + Onboard Test Capacity: • Up to 11,440 assays • 150 reagent positions: - 89 MicroSlide Cartridges (18, 50, or 60 tests/ cart) - 31 MicroWell Packs (50 or 100 tests/pack) - 30 MicroTip Packs (50 or 100 tests/pack) • User-Defined Channels: + 10 available (MicroTip) • Consumables: + VersaTips, MicroTips, Cuvettes, Signal Reagent and Universal Wash Reagent can be replenished without interrupting system operation. Reagents replenished without interrupting incubation. ERF and IWF can be replenished when all MicroSlides have completed + Onboard capacity and typical replenish frequency: • VersaTips: 2000 24 hours • MicroTips: 384 24 hours • Cuvettes: 348 24 hours • Signal Reagent: 3 packs 48 hours • Universal Wash Reagent: 5 liters 72 hours • ERF: 800 drops 24 hours • IWF: 300 drops 72 hours The science of knowing shapes the art of living. • Calibration: + 25 lots per assay may be calibrated with automatic lot switching + MicroSlide and MicroTip assays stable up to lot change + MicroWell stable for up to 28 days + Random-access calibration + Bar-coded calibrators for MicroSlide and MicroWell assays • System Startup: + 24-hour ready mode + No manual primes, purges, washes or tubing maintenance + No daily calibrations or calibration checks + Automatic integrated prime/purge for MicroWell assays • Time for Single Result: + Potentiometric: ~2.5 minutes + Colorimetric: ~6 minutes + Immuno-Rate: ~8 minutes + MicroTip: ~8-16 minutes + MicroWell: ~16-73 minutes + Real-time results data stream to LIS available • Sample Types: + Serum, Plasma, Urine, CSF, Whole Blood***, Amniotic Fluid**** • Sample Volume: + Per assay: 2-80µL + Dead volume: minimum 35µL • Sample Capacity: + Continuous load and unload + 80 samples in Universal Sample Trays + 10 samples in dedicated STAT lane 1 Availability is subject to local regulatory requirements * Except Caffeine ** Gentamicin: 24 months; Caffeine: 36 months *** For %Hemoglobin A1c and Red Cell Folate **** Not commercially available in the United States

• Sample and Reagent Management Incorporating Intellicheck® Technology: + Single-use Tip Metering verifies sample aspiration and dispense, eliminates carryover and addresses cross-contamination concerns + lot, bubble, low and high viscosity, thin layer fluid C and short sample detection + Save-the-Sample Clot/Bubble Management + Liquid level sensing + icroSlide, MicroWell and Cuvette Dispense Verification M + Reagent aspiration and dispense verifications + nboard IntelliReport provides complete traceability O and documentation of result quality • Sample Containers: + Universal Sample Trays...