Ovation® Surgical Technique
10Pages

{{requestButtons}}

Catalog excerpts

Ovation® Surgical Technique - 1

Surgical Technique

Open the catalog to page 1
Ovation® Surgical Technique - 2

Designing Surgeons: Andrew Petrella, M.D. Richard Vlasak, M.D. Table of Contents Surgical Technique Overview The following technique is a general guide for instrumentation of the Ovation® Hip Stem. It is expected that the surgeon is already familiar with the fundamentals of Total Hip Arthroplasty (THA). Each patient represents an individual case that may require modification of the technique according to the surgeon’s judgment and experience. Please see the Ovation® Hip Stem Instructions for Use (IFU) for intended uses/indications, device description, contraindications, precautions,...

Open the catalog to page 2
Ovation® Surgical Technique - 3

Surgical Technique Overview • ptimized neck geometry with highly polished surface O improves overall range of motion • vailable in 12 sizes with standard and extended neck A The Ovation® Hip Stem is a proven M/L taper design that offsets to accommodate patient anatomy accommodates multiple surgical approaches. In order to P provide options for various patient needs, the Ovation® Hip • roximal body surface is coated with titanium plasma spray for solid, long-term fixation Stem is available in a full range of sizes. • apered stem design provides excellent rotational T stability and promotes...

Open the catalog to page 3
Ovation® Surgical Technique - 4

Templates with a 20% magnification are provided by Ortho Development® Corporation for use with preoperative x-rays. Preoperative templating enables the surgeon to estimate the correct implant size as well as to identify any unusual circumstances specific to the case at hand. The templates should be used with standard preoperative lateral and A/P radiographs to determine the approximate size and position of the prosthesis (Figure 1). 3. ncision I In Total Hip Arthroplasty, exposure may be achieved through a multitude of methods based on each surgeon’s individual preference. The Ovation® Hip...

Open the catalog to page 4
Ovation® Surgical Technique - 5

Increase the Broach size sequentially until the Broach size matches the implant size determined during preoperative templating, or until sufficient stability of the Broach has been achieved. Rotational stability of the Broach is tested by turning the Broach Handle back and forth. Once the final Broach size has been determined to be stable, remove the Broach Handle and leave the Broach in place for trialing. If desired, with the final Broach inserted to the proper level, attach the Calcar Planar to a power driver and connect it to the Broach’s post (Figure 8). Advance the Calcar Planer into...

Open the catalog to page 5
Ovation® Surgical Technique - 6

7. emoral Component F Insertion Once the Femoral Stem implant is in place, trial reduction may be performed once again to check for proper seating, rotation, and to ensure the appropriate femoral head neck length is selected (Figure 12). Based on the trial reduction, the appropriate Femoral Head implant is selected by matching the desired head diameter and length to the last Femoral Head Trial used. The selected Femoral Head is placed onto the taper of the stem by hand using extreme care to keep the stem taper undamaged and clean from soft tissue or bone. Lightly tap the Femoral Head with...

Open the catalog to page 6
Ovation® Surgical Technique - 7

Ovation® Instrument Trays Blunt Tip Broach Size 1 Blunt Tip Broach Size 2 Neck Trial Size 1-3 Standard Neck Trial Size 4-6 Standard Blunt Tip Broach Size 4 Neck Trial Size 7-9 Standard Blunt Tip Broach Size 5 Neck Trial Size 10-12 Standard Blunt Tip Broach Size 6 Neck Trial Size 4-6 Extended Neck Trial Size 7-9 Extended Neck Trial Size 1-3 Extended Neck Trial Size 10-12 Extended Blunt Tip Broach Size 8 Blunt Tip Broach Size 9 Blunt Tip Broach Size 7 Blunt Tip Broach Size 10 Femoral Head Impactor Large Calcar Planar 40mm Femoral Head Impactor Large Hudson T-Handle Offset Stem Inserter Right...

Open the catalog to page 7
Ovation® Surgical Technique - 8

Ovation® Implants Femoral Head Trial 22mm -3 Femoral Head Trial 22mm +0 Femoral Head Trial 22mm +3 Femoral Head Trial 22mm +6 Femoral Head Trial 26mm -3 Femoral Head Trial 26mm +0 Femoral Head Trial 26mm +3 Femoral Head Trial 26mm +6 Femoral Head Trial 26mm +9 Femoral Head Trial 28mm -6 Femoral Head Trial 28mm -3 Femoral Head Trial 28mm +0 Femoral Head Trial 28mm +3 Femoral Head Trial 28mm +6 Femoral Head Trial 28mm +9 Femoral Head Trial 32mm -6 Femoral Head Trial 32mm -3 Femoral Head Trial 32mm +0 Femoral Head Trial 32mm +3 Femoral Head Trial 32mm +6 Femoral Head Trial 32mm +9 Femoral Head...

Open the catalog to page 8
Ovation® Surgical Technique - 9

Biolox® Delta Femoral Head 28mm S -5 Biolox® Delta Femoral Head 28mm M -1 Biolox® Delta Femoral Head 28mm L +2 Biolox® Delta Femoral Head 32mm S -5 Biolox® Delta Femoral Head 32mm M -1 Biolox® Delta Femoral Head 32mm L +2 Biolox® Delta Femoral Head 32mm XL +6 Biolox® Delta Femoral Head 36mm S -5 Biolox® Delta Femoral Head 36mm M -1 Biolox® Delta Femoral Head 36mm L +2 Biolox® Delta Femoral Head 36mm XL +6 Biolox® Delta Femoral Head 40mm S -5 Biolox® Delta Femoral Head 40mm M -1 Biolox® Delta Femoral Head 40mm L +2 Biolox® Delta Femoral Head 40mm XL +6 CoCr Femoral Head 28mm +3 CoCr Femoral...

Open the catalog to page 9
Ovation® Surgical Technique - 10

12187 So. Business Park Drive Draper, Utah 84020 801-553-9991/fax 801-553-9993 Copyright © 2013 Ortho Development® Corporation. All rights reserved. Unless otherwise indicated, all materials on these pages are copyrighted by Ortho Development Corporation. All rights reserved. No part of these pages, either text or image may be used for any purpose other than personal use. Therefore, reproduction, modification, storage in a retrieval system or retransmission, in any form or by any means, electronic, mechanical or otherwise, for reasons other than personal use, is strictly prohibited without...

Open the catalog to page 10

All Ortho Development catalogs and technical brochures

  1. Envision

    2 Pages