Ortholox® Periprosthetic Plate & Screw Solutions Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/Hook

Introduction: Ortholox® Locking Periprosthetic Plate Systems Introduction: Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook Surgical Technique: Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook Surgical Technique: Locking Attachment Plate Surgical Technique: Ortholox® UHMWPE Orthopedics Cerclage Bands and Button Implant Ordering Info: Implants Ordering Info: Instruments

Ortholox® Locking Periprosthetic Plate Systems are designed for temporary fixation to ensure stability and union of traumatic fractures, periprosthetic fractures, osteotomies performed during prosthesis revision or iatrogenic fractures. Ortholox® Locking Periprosthetic Plate Systems are compatible with Ortholox® UHMWPE Cerclage Band System thanks to its Plate-Band Button Implant and in combination; they assist in keeping the displaced bone fragments together. Ortholox® Locking Periprosthetic Plate System Ortholox® Locking Periprosthetic Plate System is capable of addressing: − complex fractures...

Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 4.5/5.0mm The Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 4.5/5.0mm is part of the Ortholox® Locking Periprosthetic Plating System, which brings alternative solution for periprosthetic fractures. Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/Hook-4.5/5.0mm is a Titanium Alloy (Ti-6Al-4V) plate. The proximal portion of the plate is pre-shaped to mimic anatomy of the proximal femur. The three proximal screw holes are designed for 5.0 mm locking screws or...

SURGICAL TECHNIQUE Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 4.5/5.0mm Ortholox® Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 4.5/5.0mm is temporarily fixed on the bone with a 2.0mm Positioning Wire using one of the wire holes in both ends of the plate. Using fluoroscopic image control (AP and lateral), check the position of the plate and verify correct sagittal plane alignment on the proximal femur. The Positioning wire can also be used as a manipulation aid for positioning the plate on the femur. The same procedure is applied to...

SURGICAL TECHNIQUE Screw length is measured with the Depth Gauge. Appropriate 5.0mm locking cortical screw or 5.0mm blunttip periprosthetic screw is inserted with the help of a surgical motor with the Large Screwdriver Shaft. The surgical motor must stopped before the screw is fully tightened. Screws can be inserted using surgical motor by Ortholox Screwdriver Shaft or by hand tightening with the Quick Coupling Handle. However final tightening must be done manually by using Ortholox® Torque Limiting Handle 4.0Nm. A “click” sound should be heard when optimal tension achieved. Ortholox Depth Gauge...

SURGICAL TECHNIQUE Locking Attachment Plate If displaced bone fragments exist, Locking Attachment Plate (LAP) can be used to capture the fragment. To place Locking Attachment Plate on the Ortholox® Locking Periprosthetic Support Trochanter Femur CablePlate, first the inner screw is inserted into the locking plate hole with a SW2.5 screwdriver. Place Locking Attachment Plate and find best position by sliding axially over the Trochanter Femur Cable-Plate with Hook. Ortholox Screwdriver Shaft f/Small Screws Ortholox Quick Coupling Handle f/Screwdriver Shaft To fix LAP to the plate, apply Connecting...

SURGICAL TECHNIQUE Locking Attachment Plate Check the length of the hole by using Depth Gauge f/Small Screws. Screws can be inserted using surgical motor by using Ortholox® Screwdriver Shaft. However final tightening must be done manually by using Ortholox® Torque Limiting Handle-1.5Nm. A “click” sound should be heard when optimal tension achieved Screw placement is completed by following the same procedure for all other holes deemed necessary. Ortholox Depth Gauge f/Small Screws Ortholox Screwdriver Shaft f/Small Screws Ortholox Torque Limiting Handle for Screwdriver Shaft - 1.5Nm . Locking...

SURGICAL TECHNIQUE Ortholox® UHMWPE Orthopedics Cerclage Bands and Button Implant If needed, Ortholox® UHMWPE Orthopedics Cerclage Bands can also be used with Ortholox® Locking Periprosthetic Plates by placing Button Implant to the appropriate screw hole. There is a rectangular recess on the tip of the Screwdriver for Button Implant where the implant will be seated and a mark on it indicating the direction of the button implant’s band/cable hole. The implant is placed on the tip of the Screwdriver for Button Implant as shown in the picture. Ortholox Screwdriver f/Button Implant Ortholox Screwdriver...

ORDERING INFO Implants Ortholox Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 2 Holes, 4.5/5.0mm Ortholox Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 3 Holes, 4.5/5.0mm Ortholox Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 4 Holes, 4.5/5.0mm Ortholox Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 5 Holes, 4.5/5.0mm Ortholox Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 7 Holes, 4.5/5.0mm Ortholox Locking Periprosthetic Support Trochanter Femur Cable-Plate w/ Hook - 9 Holes,...

ORDERING INFO Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 12mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 14mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 16mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 18mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 20mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 22mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 24mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 26mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 28mm Ortholox Locking Cortex Screw Self-Tapping - 5.0 x 30mm Ortholox Locking Cortex Screw...