We manufacture Hip & Knee Systems; + Perfect a natomic fit + Least amount of bone loss + Fast recovery

About Ortonom From our foundation up to today , we targeted at being a company adopting a production policy that enables products with original and best design. In a short time , Ortonom Medical has grown into a prestigious and preferred company setting off in the market with a young and dynamic team supported by the sound technology investments. Thanks to its visionary management and production in the field of orthopedic and traumatology in its modern facilities, it has become a company experiencing a rapid increase in market share. After a short time of its foundation, the company began to...

+ OrtoHip Hip Prosthesis consists of 3 models; Partial, Total and Revision. OrtoHip offers the most permanent solution for hip deformities and fractures. The prosthetic procedure includes the applications of Calcar, Zweymuller, Corail System and Revision, cemented or cementless. Partial and Total procedures are carried out in accordance with these systems. + They are manufactured with precise technique of CoCr with casting and titanium with forging methods.

TOTAL HIP SYSTEM Consists of 2 different systems: + CEMENTLESS TOTAL HIP PROSTHESIS consists of Cementless Femoral Stem, Metal Head, Acetabular PE Liner, Acetabular CupScrew and Ha Coated Acetabular Cup. + CEMENTED TOTAL HIP PROSTHESIS consists of Cemented Femoral Stem, Metal Head and Cemented Acetabular PE CUP.

+ Total hip prosthesis is the operation for replacing a hip joint that has been damaged due to primary or secondary cause and has advanced osteoarthritis. + The total hip prosthesis, aims to create an artificial joint to provide painless joint movement by specially designed parts manufactured from CoCr, Ha coated Titanium and PE 1020 materials. + Femoral Stems are used as porous surface with Ha coating or Polish surface. + 3 different Femoral stem option provides variability.

CEMENTLESS ACETABULAR CUP + Manufactured from CoCr and Titanium materials. + The exterior surface is coated with DUAL/Ha, which enables better bone integration. + The grooved screw points allow fixation to the bone. + Anti-rotational spikes on the side surfaces help ensure stabilization. + Insert is locked with a special locking mechanism. + Manufactured in the dimensions: 42 / 44 / 46 / 48 / 50 / 52 / 54 / 56 / 58 / 60 / 62 LINER + Manufactured by PE 1020 material. + Special locking feature to be locked into acetabular cup. + 0 / 10 / 20 degrees are available. + 42 / 44 / 46 / 48 - can be used...

CEMENTED ACETABULAR CUP + Manufactured by PE 1020 material. + Suitable for use with cement. + The special groove structure provides high stabilization to the bone through cement. + Can be used with Metal Head in sizes of: Ø 42 / 44 cups can be used with - 28 mm Metal Head Ø 46 / 48 / 50 / 52 cups can be used with - 32 mm Metal Head Ø 54 / 56 / 58 / 60 cups can be used with - 36 mm Metal Head 0 / 10 degrees are available. METAL HEAD + Manufactured from CoCr / Titanium material with a polished surface. + Interior conic diameter is manufactured in accordance with 12 / 14 mm cone specifications of...

+ OrtoHip Hip Prosthesis consists of 3 models; Partial, Total and Revision. OrtoHip offers the most permanent solution for hip deformities and fractures. The prosthetic procedure includes the applications of Calcar and Revision, cemented or cementless. Partial and Total procedures are carried out in accordance with these systems. + They are manufactured with precise technique of CoCr with casting and titanium with forging methods.

The system consists of Cemented and Cementless Femoral Stem, Metal Head and Bipolar Cup components. Comparing to other treatment methods, this type of operations provides better results for the patients after the surgery based on medical literature.

ORTOHIP + It is the type of prosthesis in which the femoral head and neck, or in other words the upper end of the femur is replaced, with the preservation of acetabulum. Bipolar hip prosthesis consists of 3 parts: 1- Femoral Stem (Cemented or Cementless and CoCr or Titanium) + Femoral Stems are designed as cemented and cementless HA-coated. + CoCr and PE material are assembled together forming the Bipolar Cup and motion is provided by insertion of the Metal Head into Bipolar Cup with the help of the locking mechanism. + This system is used for cases where total hip replacement is not indicated....

BIPOLAR CUP + CoCr / Titanium material is polished and assembled with PE 1020 material liner with a locking mechanism. + Manufactured in the dimensions: 42 / 44 / 46 / 48 / 50 / 52 / 54 / 56 / 58 / 60 / 62 METAL HEAD + Manufactured from CoCr / Titanium material with a polished surface. + Interior conic diameter is manufactured in accordance with 12 / 14 mm cone specifications of the femoral stem. It has 5 different sizes to adjust the interior depth size. + Has an exterior diameter of Ø28mm and -6 /-3 / 0 /+3 /+6 interior conic diameter sizes. CEMENTED FEMORAL STEM + Manufactured from CoCr and...

+ OrtoHip Hip Prosthesis consists of 3 models; Partial, Total and Revision. OrtoHip offers the most permanent solution for hip deformities and fractures. The prosthetic procedure includes the applications of Calcar and Revision, cemented or cementless. Partial and Total procedures are carried out in accordance with these systems. + They are manufactured with precise technique of CoCr with casting and titanium with forging methods.

REVISION TOTAL HIP SYSTEM Consists of 2 different systems: + CEMENTLESS REVISION HIP PROSTHESIS consists of Cementless Revision Femoral Stem, Metal Head, Acetabular PE Liner, Acetabular Cup Screw and Ha Coated Cementless Acetabular Cup. + CEMENTED REVISION HIPPROSTHESIS consists of Cemented Revision Femoral Stem, Metal Head and Cemented Acetabular PE CUP.

+ Revision total hip prosthesis is the procedure of removing the existing prosthesis as a result of complications such as loosening of the hip and prosthesis, pain and infection in the patients who have undergone prosthesis surgery, and then placing the appropriate and true prosthesis. + It is manufactured from CoCr and Titanium materials. + Acetabular cup, Liner and Metal Head components are same used in Total Hip Prosthesis.Therefore, different femoral stem options are available in revision surgery.