TRIO.BAS™ SELFTEST SYSTEM

Product catalog summary

Overview: The document outlines the features and specifications of the TRIO.BAS SELFTEST system, designed for use in pharmaceutical, cleanroom, and biotech industries. It emphasizes the importance of having at least one SELFTEST as a best practice to ensure the correct volume of aspirated air during sampling.

Specifications:

The SELFTEST system is available in two models: one for 100 lt/min and another for 200 lt/min, suitable for Contact Plate or Petri 90 mm plate.
It includes a technopolymer aspirating bell chamber and a base station induction battery charger.
The system is validated according to EN 17141 standards.

Functionality:

The SELFTEST system checks the precision of the air flow rate, which is crucial to avoid invalidation of tests between annual controls for official certification.
The system measures the depression generated by the air sampler and compares it with a set value stored in the TRIO.BAS sampler.
Results are displayed on the LDC of the TRIO.BAS air sampler as OK, WARNING, or ERROR, indicating the calibration status.
Results are automatically recorded into the air sampler to ensure data integrity.

Recommendations:

Use the SELFTEST system as part of routine checks to maintain calibration accuracy.
Ensure compatibility with air samplers that have induction chargers.

Additional Features:

The base station includes a power supply for charging TRIO.BAS air sampler batteries.
The system is built in ISO 9001 certified premises, ensuring quality and reliability.

Catalog excerpts

ORUM INTERNATIONAL © ALL RIGHTS RESERVED Induction battery charger incorporates a differential pressure device to monitor the deviation of the flow rate compared to the calibration value. • Having at least one SELFTEST is recommended as part of your best practice to verify the correct volume of aspirated air (ok - warning - error) when sampling with single or multiple instruments • Technopolymer aspirating bell chamber • Base station induction battery charger • Validated according to “EN 17141” ORUM INTERNATIONAL © ALL RIGHTS RESERVED

Open the catalog to page 1

DESCRIPTION • The SELFTEST is a system that, instead of the auto calibration already present in the air sampler, checks the precision of the air flow rate. This check is necessary to avoid invalidation of the tests between annual controls for official certification. • The bell chamber is connected through a tube to the base station induction battery charger. • Main customers are GLP/GMP for pharmaceutical, cleanroom and biotech industries. • The base station includes the power supply for charging the TRIO.BAS air sampler batteries. • SELFTEST is only suitable for air samplers with induction chargers....

Open the catalog to page 2

All ORUM INTERNATIONAL catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list