Oxygen devices OXYGEN Emergency Medical Systems OXYGEN DEVICES Emergency Medical Systems Back in the year 2000 the Oscar Boscarol srl started the development of this family of product by using the most innovating production and design techniques available. All of the products under this category are specifically designed to be mounted on emergency vehicles as kits and particularly suitable for emergency systems and field ambulance activities. Thanks to their reliability they are also worldwide distributed both in hospital and in domestic application alike. All the devices have been strictly tested in order to fulfill all current regulatory issues in terms of compatibility with oxygen as per ISO15001: feasibility studies, risk analysis and usability researches have been scrupulously performed in order to make them fully compliant to the medical field; for this reason, special superficial processes was undertaken to satisfy bio-compatibility. AUTOMATIC SWITCH NEW AUTOMATIC SWITCH OB OXI SWITCH Medical device for the automatic switch of the oxygen flow supplied by two pressure reducers compliant to ISO10524-1 (400 kPa + 100 -0 outlet) Oxygen flow switch from one cylinder to the other is generated by a dedicated electronic control Such function is automatic when connected to the OB-OXID system. Via Enzo Ferrari 29, Bolzano 39100 ITALY Ph. 0039 0471 932893 - Fax 0039 0257760140 [email protected] - www.boscarol.it Oscar Boscarol srl - Via Enzo Ferrari 29, Bolzano 39100 ITALY Ph. 0039 0471932893 - Fax 0039 0257760140 - [email protected] - www.boscarol.it Medical device in IIa class of risk Suitable for the use of therapeutic oxygen Electrical selection of cylinder 1 or 2 In case of electric fault it can be manually operated using frontal knob Transducer available for low pressure to terminal units Entirely made in specifically treated aluminium Possibility to fix it on the wall using 2 screws Inlet connectors for oxygen hose are fully compatible with all connectors produced by Oscar Boscarol srl Inlet max. pressure: 8 bar Suitable for the connection to OB-OXID panel Power supply: 6V Max driver pulse T1=3 seconds Note: the device can only be connected to pulse-width/pulse-length modulation electric signals Oscar Boscarol srl - Via Enzo Ferrari 29, Bolzano 39100 ITALY Ph. 0039 0471932893 - Fax 0039 0257760140 - [email protected] - www.boscarol.it

Oxygen devices OB-OXID MONITOR OB-OXID Monitor Medical device allowing real time monitoring of oxygen pressure in two cylinders It works through the tension of pressure reducer transducer outlet or via its proper adapters. Available both in the EASY and AUTO version: the AUTO version activates the oxygen switcher OB OXI SWITCH both manually or automatically In the OB OXID 3D version, the device also allows low pressure visualization thanks to an additional display High precision and excellent visibility due to the value detection displayed both graphically and numerically Alarms for faults detection...