Vertebroplasty- Kyphoplasty Surgical Technique

Product catalog summary

Introduction
The document describes the use of the ON PLUS GAUGE needle and associated tools in vertebroplasty and kyphoplasty procedures. These procedures involve entering the vertebral body safely through the pedicle, guided by an X-ray beam.

Specifications and Tools

ON PLUS GAUGE Needle: Used for initial entry into the vertebral body.
Kirschner Wire: Inserted through the needle to guide the working cannula, after which the needle is removed.
ON PLUS OSTEO Introducer: Acts as a cannula for bone filling, allowing cement injection into the vertebral body.
ON PLUS Spacer (Drill): Creates a cavity inside the spine by drilling into the vertebral body.
ON PLUS Bone Filler: Used to inject bone cement into the vertebral body.

Procedures

Vertebroplasty: Involves the injection of bone cement into the vertebral body using the tools mentioned.
Kyphoplasty: Similar to vertebroplasty, but includes the inflation of a balloon to restore vertebral height before cement injection.

Contact Information
For more information, visit www.osimplant.com or contact via email at [email protected]. Address: Mustafa Kemal Mahallesi, 2133. Sok No: 4/2 Royale Office PC: 06510 Çankaya/Ankara, Turkey. Phone: +90 312 473 82 80.

Catalog excerpts

Vertebroplasty- Kyphoplasty Surgical Technique-1

VERTEBROPLASTY- KYPHOPLASTY SYSTEM ON PLUS GAUGE NEEDLE KIRSCHNER WIRE ON PLUS GAUGE needle is used for entering the vertebral body is carried ot safely by passing through the pedicle. It is guided to the vertebra by a small hole through the patient’s skin, guided by X-ray beam. The Kirschner wire is sent into the needle, and then the needle is removed.

Open the catalog to page 1

Vertebroplasty- Kyphoplasty Surgical Technique-2

VERTEBROPLASTY- KYPHOPLASTY SYSTEM KIRSCHNER WIRE ON PLUS OSTEO INTRODUCER The Kirschner wire serves as a guide for the working cannula. The Kirschner wire is sent into the needle, and then the needle is removed. ON PLUS OSTEO INTRODUCER enables the procedure to be performed inside the spine over the kirschner wire applied for fixation after entering the vertebral body with the first input needle. It acts as a cannula and bone filling is passed through this cannula to inject cement into the vertebral body.

Open the catalog to page 2

Vertebroplasty- Kyphoplasty Surgical Technique-3

VERTEBROPLASTY- KYPHOPLASTY SYSTEM ON PLUS SPACER ( DRILL) ON PLUS BONE FILLER ON PLUS SPACER (DRILL) is used to create a cavity inside the spine by drilling in the vertebral body. ON PLUS BONE FILLER is used to send bone cement to the vertebral body. Bone filler is filled with cement. Cement injected into the vertebral body by pushing the bone filler pusher. All cement is injected.

Open the catalog to page 3

Vertebroplasty- Kyphoplasty Surgical Technique-4

VERTEBROPLASTY- KYPHOPLASTY SYSTEM Vertebral body section view ! for more information Address Mustafa Kemal Mahallesi, 2133. Sok No: 4/2 Royale Office PC: 06510 Çankaya/Ankara, Turkey Phone +90 312 473 82 80 E-mail [email protected] www.osimplant.com For the Kyphoplasty System the methods of entry into the spine and the products used are the same as for vertebroplasty. After the introduction, the balloon begins to inflate slowly.

Open the catalog to page 4

All Osimplant catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list