Signex Universal 5.0 System
18Pages

Table of CONTENTS INTRODUCTION SCREW SYSTEM PLATE SYSTEM PLATE & SCREW INSTRUMENT Features & Benefits Specification Features & Benefits Femur Tibia Large Fragment

INTRODUCTION Overview Various clinical challenges surgeons are facing these days in surgical fracture treatment require solutions that can be only solved with innovative products to reconstruct the anatomy and restore its function. Osteonic proudly meets these high demands with Signex Universal 5.0 System, thanks to its cutting-edge development and manufacturing power coming from its key personnel with in-depth knowledge and experiences of more than two decades in products. Signex Universal 5.0 System Sort Femur Large Fragment Plate Distal Femoral Plate Femoral Shaft Plate Proximal Lateral...

SCREW SYSTEM Features & Benefits Cortical Screw - Compresses the plate to the bone or creates axial compression - Rounded head - Stardrive recess - Fully threaded shaft - Self tapping tip Locking Screw - Creates a locked, fixed angle screw/ plate construct - Threaded conical head - Stardrive recess - Fully threaded shaft - Self tapping tip ø4.5 Screw: Available length: 1470mm Code:S1C.45XXX ø5.0 Screw: Available length: 14-90mm Code:S1B50xxx Cannulated Conical screw - Compresses the plate to the bone or creates axial compression - Conical head - Stardrive recess - Partial threaded shaft -...

SYSTEM Features & Benefits Structure of the same shape as the theoretical dimension according to ASTM F543-07 Optimized for theoretical force transmission and axial alignment of screw and shaft. Therefore, the occurrence of shaking is minimized. The optimum engagement between the shaft and screw allow to Pick up screw without the aid of an auxiliary device. Assembly type Contact surface Self-tapping flutes Unlike existing assembly types, minimum clearance. Good center alignment with shaft. The force transmitting surface of the shaft evenly contact the screw. So, there is almost no damage to...

Femur / Tibia / Large Fragment Femur / Tibia / Large Fragment

Femur / Tibia / Large Fragment Femur / Tibia / Large Fragment

PLATE SYSTEM Features & Benefits Compression holes For Locking screws K-wire holes Anatomic plate designs support fracture reduction

Distal taper design to minimize stress concentration Low profile plates to reduce soft tissue irritation Femoral Shaft Plate - Locking compression plate -T apered end design for minimally invasive surgery Proximal Medial Tibia Plate - Locking holes / compression holes - Pre-contoured plate allows anatomical fit - Rounded edge of plate end help with easy insertion Large Fragment Plate - Locking compression plate -T apered end design to minimize tissue damage - Limited contact design to reduce plate to bone contact (Minimizing vascular damage)

PLATE SYSTEM Femur Plate Shape Item Code Left Right K1E.50050 Distal Femoral Plate Femoral Shaft Plate Spec Hole Length 5

PLATE SYSTEM Tibia Plate Shape Item Code Left Right G3E.50110 Proximal Lateral Tibial Plate Spec Hole Length Proximal Medial Tibial Plate

PLATE SYSTEM Large Fragment Shape 5.0 Straight Locking Plate, Broad 5.0 Straight Locking Plate, Narrow

PLATE & SCREW 5.0 Straight Locking Plate, Broad Distal Femoral Plate 5.0 Cannulated Conical Screw 5.0 Cannulated Locking Screw 5.0 Cannulated Conical Screw 5.0 Cannulated Locking Screw 5.0 Straight Locking Plate, Narrow Femoral Shaft Plate 5.0 Cannulated Conical Screw 5.0 Cannulated Locking Screw 5.0 Cannulated Locking Screw 5.0 Cannulated Conical Screw Proximal Lateral Tibial Plate 5.0 Cannulated Conical Screw 5.0 Cannulated Locking Screw Proximal Medial Tibial Plate 5.0 Cannulated Conical Screw 5.0 Cannulated Locking Screw

INSTRUMENT Container Guide wire Y1A.25010 Ø2.5 Drill Tip Guide Wire(Ø2.5/250mm) Plate tray Y1A.43020 Ø5.0 Cannulated Screw Drill Bit (I.D Ø2.7/O.D Ø4.3/270mm)) Z1M.01010 Screw tray Instrument tray Y1B.50030 Ø5.0 Cannulated Screw Driver(T25/120mm)

INSTRUMENT Handle Y1C.35020 3.5/5.0 System T Handle (AO Type) ap Drill sleeve Y1F.50010 Ø5.0 Screw Drill Sleeve Guide wire sleeve Y1F.50020 Ø2.5 Guide Wire Sleeve(Ø5.0 Screw) Torque limiter Drill guide Depth gauge Y1G.50030 Ø5.0 Screw Depth Gauge (Scale up to 110mm) Y1G.73020 Ø2.5 Guide Wire Depth Gauge (Scale up to 140mm) Y1F.45020 Ø4.5 Lag Screw Drill Guide Y1F.45030 Ø4.5 Screw Drill Guide

INSTRUMENT Drill case Guide wire Y1Z.25010 Ø2.5 Guide Wire (Ø2.5/225mm) Stoper drill Y1Z.43010 Ø4.3 Stoper Cannulated Drill Y1Z.50010 Ø5.0 Stoper Cannulated Drill

OSTEONIC Co., Ltd. 1206Ho, 38, Digital-ro 29-gil, Guro-gu, Seoul, Korea P.O. #08381 TEL: +822 6902 8400 FAX: +822 6902 8401 www.osteonic.com