New Products & Proven Classics Materials, Components & Systems
32Pages

New Products & Proven Classics Materials, Components & Systems

Explanations of hazardous material symbols (risk and safety phrases)* Inflammable liquids Inflammable solids Self-decomposing substances and mixtures Pyrophoric liquids Pyrophoric solids Substances and mixtures capable of self-heating Substances and mixtures that release inflammable gases upon contact with water Organic peroxides Oxidising gases Oxidising liquids Oxidising solids Acute toxicity (oral, dermal, inhalative) Skin irritation Skin sensitisation Specific target organ toxicity (one-time exposure) Hazardous Substances 5 New Products 6 Proven Classics 48 • Please note that the base...

Materials with Skin Contact CE Marking Medical devices are not permitted to endanger the health of users or third parties at any time. In addition, the risks generally associated with their use always have to be justifiable compared to the benefits. This is why medical devices are subject to the provisions of the MPG (Medical Products Law), and certain safety criteria must be met to bring them into circulation. This is con­ r­ ed by the visible CE marking. Ottobock fi m declares with sole responsibility that all medical devices that are manufactured by Ottobock and bear the CE marking...

Biplatrix® Quick Plaster Bandage • For taking a plaster cast • Consists of a cotton substrate coated with a special natural plaster blend • Very easy moulding • Minimised dipping losses • Ensures high final strength, even with few layers • Also available as 699G21 Longuette for individual cutting • Dipping water temperature: 20 °C to 25 °C • Working time: approx. 2 minutes • Load bearing capacity: partial load after 30 minutes, full load after 48 hours Order by Package of 20 (sealed @ 2 bandages) Order by Package of 10 or 20 (sealed @ 2 bandages) °rder ^_ Package of 1 (4 layers)_ Biplatrix*...

616T111 ThermoLyn supra soft plus Silicone 617R15=5 TP.C Carbon Fibre Woven EVA with silicone Areas of Application • For high-strength, very thin orthoses based on thermo­ plastic materials Areas of Application • For fabricating highly flexible inner sockets for the thigh Benefits • EVA with silicone • Very high flexibility • Facilitates the fabrication of more comfortable socket rims • High surface quality • Comfortable to wear • Good grinding characteristics • Washable Benefits • Matrix: TPU • Can be thermoformed under pressure • High tensile strength • Suitable for surfaces • Paintable •...

616T112/616T113 ThermoLyn supra flexible EVA Areas of Application • For fabricating of shoe-insoles • For fabricating of flexible diagnostic/definitive sockets for foot prostheses • For fabricating of flexible diagnostic sockets for lower and upper limb prostheses • For fabricating of water-resistant splints and supports • For fabricating of flaps and closures for orthoses • For flexible prim designs for orthoses Order example Reference number Order example Reference number Reference number transparent (99), white (6), black (7), blue (5), light blue (5.3), dark blue translucent (5.5), red...

ThermoLyn soft, black • Suitable for fabricating flexible inner prosthetic sockets in lower limb prosthetics • Sheet size of 1225x1225 mm is particularly well suited for • High flexibility • Low density for especially low weight • High tensile strength • High surface quality (convection oven, infrared oven) Order example Reference number = Length x Thickness Reference number black black Available information materials 646D300=GB Technical Information Thermoplastics 14 Ottobock | New Products & Proven Classics C-Orthocryl SKINGUARD Resin Hardener Resin Colour Paste Practical recommendation •...

617H119 Orthocryl Lamination Resin 80:20 PRO 616S5/616S6 BetaSil Kit Areas of Application • For customising a standard liner made of silicone (616S5=1: 1 spray gun, 15 mixers, 3 cartridges) • For fabricating silicone pads (616S5=2: 1 spray gun, 20 mixers, 5 cartridges) • Bonds with other silicones (85H11 Pastasil or 85P31 Chlorosil) and adheres to other synthetic materials, provided these have a rough surface Practical recommendation • For sheet casting, use only 616F4 PVA Sheeting or 99B81 PVA Bags • 642K13 Filling Set is available for containers 25 kg. • In order to ensure that all air...

Processing for 616S5=2 Fabrication of silicone inserts 1 einforce the socket in the usual manner, recess only R the required area and strengthen with 616G26=150 Polyester Spacer Fabric, then laminate. 18  Ottobock | New Products & Proven Classics Processing for 616S5=1 Customising a standard liner made of silicone 2 pply a dummy made of 85H11 Pastasil in the intended A position. After curing, cut to size, sand and roughen from the outside. Also roughen the casting and clean with 634A58 Isopropyl Alcohol. Place the Pastasil dummy, reinforce in the usual manner and then over-laminate. 3 emove...

617S173 Nora® Aero sorb, soft Areas of Application • For various applications • Outstanding adhesive properties on many different materials (e.g. metal, PVC, ABS, PC, PBT, rubber, wood, paper, cardboard, leather and textiles) • To fill large gaps up to 5 mm Processing • Processing time 90 – 180 sec. • Functional strength 2 – 4 min. • Initial strength 3 – 5 min. • Final strength 24 h • Temperature stability –20 °C to +80 °C/–4 °F to +176 °F (short-term up to 100 °C/212 °F) • Discard the first 2–3 drops from the mixer • Hold the joined components in position until they are secured • The...

Nora® Aero sorb, medium • Particularly recommended for butterfly rolls, heel and forefoot padding • Foot bed adapted for diabetic patients • Heel spur recess with heel spur insoles • Light cellular rubber, closed-cell • Hardness approx. Shore A 12; Shore A zero 26 • Delayed resilience • Good thermoforming properties • Good adhesive characteristics • Good sanding characteristics • Bedding and damping properties; point pressure relief • Shock absorbent (hotplate, convection oven) Order example Reference number Reference number Available information materials: 646F295=GB Poster: Padding...