New Products & Proven Classics Materials, Components & Solutions

Explanations of hazardous material symbols (risk and safety phrases)* Hazard classes Hazard categories Inflammable gases Inflammable aerosols Inflammable liquids Inflammable solids Self-decomposing substances and mixtures Pyrophoric liquids Pyrophoric solids Substances and mixtures capable of self-heating Substances and mixtures that release inflammable gases upon contact with water Organic peroxides Oxidising gases Oxidising liquids Oxidising solids Acute toxicity (oral, dermal, inhalative) Skin irritation Skin sensitisation Specific target organ toxicity (one-time exposure) Respiratory system...

Materialien Guide 2.0 Komponenten und Systeme For more products in the materials category, please see our current catalogue “Materials, Components & Solutions” 646K1=GB or our “Materials Guide 2.0” 646A314. Up-to-date product information is always available to you on our website www.ottobock.com. New Products & Proven Classics | Ottobock 3

Materials with Skin Contact CE Marking Medical devices are not permitted to endanger the health of users or third parties at any time. In addition, the risks generally associated with their use always have to be justifiable compared to the benefits. This is why medical devices are subject to the provisions of the MPG (Medical Products Law), and certain safety criteria must be met to bring them into circulation. This is confirmed by the visible CE marking. Ottobock declares with sole responsibility that all medical devices that are manufactured by Ottobock and bear the CE marking conform with...

Hazardous Substances Your Needs The first and most important step in the safe use of chemicals is to be aware of their identity, the associated risks to health and the environment and the means to control these risks. This inherently complex knowledge must be organised so that essential information on hazards and the corresponding protective measures can be identified and communicated to the user in a readily comprehensible manner. The Ottobock Solution As a global player, we obligate ourselves to safeguard and protect the health of people and the environment in which we work. With us, you will...

Ottobock | New Products & Proven Classics

Ottobock | New Products & Proven Classics

Order example Reference number = Length x Width • For taking a plaster cast • Consists of a cotton substrate coated with a special natural plaster blend • Very easy moulding • Minimised dipping losses • Ensures high final strength, even with few layers • Also available as 699G21 Longuette for individual cutting • Dipping water temperature: 20 °C to 25 °C (68 °F to 77 °F) • Working time: approx. 2 minutes • Load bearing capacity: partial load after 30 minutes, full load after 48 hours Order by Package of 20 (sealed @ 2 bandages) Order by Package of 10 or 20 (sealed @ 2 bandages) Biplatrix® is...

• For high-strength, very thin orthoses based on thermoplastic materials • Can be thermoformed under pressure • High tensile strength • Potentially adhesive • Can be welded with components of the same matrix • Clean processing • No special storage requirements (e.g. no cooling) • Moderate temperature recommendation: approx. 220 °C / 428 °F Fibre weight per unit area Fibre content Resin content Bond type 60% by weight 40% by weight Twill 2/2 10 Ottobock | New Products & Proven Classics

Article number natural-coloured natural-coloured • For fabricating highly flexible inner sockets for the thigh • Very high flexibility • Facilitates the fabrication of more comfortable socket rims • High surface quality • Good grinding characteristics • Temperature recommendation: 150 °C / 302 °F (convection oven, infrared oven) Available information materials: 646F265=GB Poster Thermoplastics 646D300=GB Technical Information Thermoplastics 646D733=EN Product Information ThermoLyn for flexible diagnostic and definitive sockets New Products & Proven Classics | Ottobock 11

Order example Reference number = 400 x 400 x Thickness • For fabricating of flexible diagnostic/definitive sockets for foot prostheses • For fabricating of flexible diagnostic sockets for lower and upper limb prostheses • For fabricating of water-resistant splints and supports • For fabricating of flaps and closures for orthoses • For flexible prim designs for orthoses • Permanently elastic • Dimensionally stable • High friction • More comfortable socket edge design • Large choice of colours • Subsequent welding possible Reference number Temperature recommendation transparent (99), white (6),...

Practical recommendation 5.5 Dark Blue Translucent • For use on smooth, dry and porous plaster casts (87G2) • Use a brush to apply a thin layer of Araform Parting Agent (84A4=12) on the plaster cast, then polish • Short transfer distance from oven to model • Do not use talcum powder • While heating it in the oven, use a clean and smooth parting film as underlay • While later welding of lamination discs, reinforcement bars, etc. leave model under vacuum to guarantee dimensional stability • While welding the material, avoid inclusions of air New Products & Proven Classics | O

• Suitable for fabricating flexible inner prosthetic sockets in lower limb prosthetics • Sheet size of 1225x1225 mm is particularly well suited for the fabrication of HD sockets • High flexibility • Low density for especially low weight • High tensile strength • High surface quality • Temperature recommendation: 130 °C / 266 °F (convection oven, infrared oven) Order example Reference number = Length x Thickness Available information materials: 646F265=GB Poster Thermoplastics 646D300=GB Technical Information Thermoplastics Colour black black 14 Ottobock | New Products & Proven Classics