Nova 600 Series
4Pages

The Nova Microfocus System 600 Series is a 90kV, 80W, water-cooled X-ray source designed for applications where high power, high magnification and small spot size are important. Operated by an external high voltage Smart Controller capable of providing variable voltage and power control, the Nova Microfocus System delivers exceptional magnification and image quality with full control of "Brightness Maximum flux output is maintained through automatic matching of a given power setting to a corresponding optimal spot size. Benefits • Exceptional magnification and image quality • Complete range of user control — ideal for research applications • High power operation — ideal for high flux applications and experiments. • Compact, lightweight design — ideal for portable applications • Integrated package eliminates HV cable for improved reliability • Includes controller with Smart Brightness control Applications • Microtomography • Microfluorescence • CT imaging for life sciences • Microdiffraction and industrial inspection OXFORD INSTRUMENTS

DB-25 CONNECTOR LEMO® 4 PIN CONNECTOR EEG.0K.304.CLL USE WITH MATING CONNECTOR FGG.0K.304.CLA50 WARNING: CONTENTS UNDER PRESSURE. DO NOT REMOVE SCREWS. 0 NOMINAL SPOT LOCATION Nova 600 Series 90kv Water-Cooled Microfocus X-ray Source ANODE TEMPERATURE NOT TO EXCEED 70 C. INTERLOCK TRIPS AT 71 C. 47 1.84 3.8 .15 SPOT TO ADAPTOR SURFACE SPECIAL FILL CAP SUPPLIED FOR SF6 REFILL ONLY. DATA SHEET TO LOCATE SPOT WITHIN .010 [.25] SQUARE REFERENCE TO 2-56 HOLE PATTERN CENTER SWAGELOK® QUICK CONNECT B-QM2-B1-200 USE WITH MATING CONNECTOR B-QM2-S-XXXX WATER ONLY, 0.15 L/MIN MINIMUM FLOW RATE AT 85...

Power on can be accomplished remotely by X-ray on/off command However, if cathode emitter is turned off, power is restored only through front panel on/off switch. Safety interlocks available on real panel. Baud Rate: 9600 ASYNC Flow control: None Parity: None Anode voltage 10 to 90kV (example: VCN 50 = set set: 50kV) Brightness set: 10 to 80W (example: WCN 40 = set 40W) Command: X-ray ON/OFF Command: Voltage min-max set Command: Brightness min-max set Read Back Status: Stand-by, warm-up, output, fault modes in ASCII format Fault: Display panel information except remote/local mode will be in...

• Runs under LabVIEW RT & MS-Windows • Works in conjunction with RS232 control interface • Complete control of voltage, power, and focus • Dynamic status display • Open software architecture allows for modification with available additional development software • Dynamic fault display • Ideal for R&D applications NATIONAL ^INSTRUMENTS Functions Microfocus Source with the following Class-Leading Performance Characteristics: # The Nova 600 Series is a fully integrated 90kV X-ray source. Its high voltage power supply and controller provide variable control of high voltage from 10-90kV and beam...