MONOPLACE HYPERBARIC CHAMBER Model: Medical Use TECHNICAL OFFER Top Quality Products Internationally Certified Hyperbaric Chambers for Medical Therapy and Diver Recompression Treatments 516-546-2026 | [email protected] | 74 Woodcleft Avenue, Freeport, NY 11520, United States

HYPERBARIC CHAMBERS DESCRIPTION & SPECIFICATIONS MONOPLACE HYPERBARIC CHAMBER MO-13 • The Model OXICAB MO-13 Hyperbaric Chamber is a mono-place chamber, designed to perform medical therapy under controlled hyperbaric conditions up to 3 ATA / 300 kPa / 29.4 psig working pressure. • This model is available with a hybrid system option. In this configuration the chamber environment may be pressurized with air or oxygen. • The OXICAB MO-13 Hyperbaric Chamber is a pressure vessel made of high quality steel in a horizontal cylindrical structure, incorporating a transparent acrylic tube section of 1,300...

HYPERBARIC CHAMBERS SPECIFICATIONS & DIMENSIONS MONOPLACE HYPERBARIC CHAMBER MO-13 • Special Steel section is manufactured & certified according to the ASME, PVHO-1 standards • Acrylic tube section is manufactured & certified according to the ASME, PVHO-1 standards • Min / Max Ventilation Rate is adjustable from 30 – 300 lpm • Pressurization selectable using Oxygen or Air with the Hybrid Option • Maximum working pressure: 3 ATA (29.4 psi) • Exterior diameter of steel section: 940 mm (37 inches) • Interior diameter of steel section: 927 mm (36.5 inches) • Exterior diameter of acrylic tube: 900...

HYPERBARIC CHAMBERS DESIGN AND FEATURES MONOPLACE HYPERBARIC CHAMBER MO-13 • The Hyperbaric Chamber OXICAB MO-13 is designed as a mono-place to accommodate one single patient. • The Chamber Control Panel is installed laterally, attached to the steel structure of the chamber. This panel contains all the equipment controls, gauges, operation valves, emergency valves, intercom, etc… for the full operation of the equipment. • The control panel of the Hyperbaric Chamber OXICAB MO-13 can be mounted either to the occupant’s left or right side according to the needs of the customer. Chambers can be supplied...

HYPERBARIC CHAMBERS blocks the door from opening while the chamber is pressurized. • When pressurizing with oxygen, an additional safety system is incorporated into the pressurization system to prevent oxygen from entering the chamber while the chamber door is open. This ensures that oxygen does not accidentally contaminate the treatment room. • A communication system allows for constant communication between the patient and the chamber operator. The control panel features the telephone for the operator and inside the chamber there is a speaker system and a “hands-free” microphone for the patient....

HYPERBARIC CHAMBERS HYBRID OPTION MONOPLACE HYPERBARIC CHAMBER MO-13 The Hybrid Option is included with model MO-13-H. Our Monoplace Hyperbaric Chamber Model MO-13 is pressurized only with medical oxygen. The chamber can be upgraded to include a hybrid operating system which permits pressurization with either oxygen or compressed air. The operator can choose to pressurize the chamber with oxygen and use the internal mask in the hybrid system to allow the patient to take air-breaks during the treatment. Air-Breaks benefits are explained and discussed in Chamber Operator training. The Hybrid mode...

HYPERBARIC CHAMBERS OVERVIEW OF CHAMBER OPERATION MONOPLACE HYPERBARIC CHAMBER MO-13 Our Mono-place Hyperbaric Chamber OXICAB MO-13 is manufactured with automatic systems for pressurization, ventilation and depressurization. The automatic systems allow the chamber operator to perform the following: • Programming the target pressure for each session of HBO therapy as indicated by the prescribing doctor. • Programming of the pressurization speed to reach the target pressure. This speed will depend on patient comfort. • Start the pressurization session with a single ON/OFF button, select the rate...

HYPERBARIC CHAMBERS DOCUMENTS AND CERTIFICATION MONOPLACE HYPERBARIC CHAMBER MO-13 At the time of shipment of the equipment, our company will send the customer the following documents: • COMMERCIAL INVOICE • PACKING LIST • BILL OF LADING (BL) • CERTIFICATE OF ORIGIN • USER MANUAL • CERTIFICATE OF GUARANTEE • INTERNATIONAL CERTIFICATIONS The international certifying company Inspectorate, of the Bureau Veritas Group, certifies throughout the manufacturing process that we meet the following standards: • ASME (American Society of Mechanical Engineers) Boiler and Pressure Vessel Code, Section VIII,...

HYPERBARIC CHAMBERS SERVICES AND ADVICE MONOPLACE HYPERBARIC CHAMBER MO-13 It is essential that when the customer decides to purchase any of our hyperbaric chambers that a consultation is scheduled with our engineers and hyperbaric specialists. This will make the installation process easier, more efficient, and less expensive. Some important issues that must be considered are: • Where to place the Hyperbaric Chamber? • What oxygen system is intended? Where will it be installed? Where are the oxygen inlet & outlet pipes installed? • Do we require an Air system? Are we installing an Air-Break system?...