DPSS laser Optical characteristics * Optical characteristics characteristics ** Optical Emission wavelength Linewidth, FWHM Part number Free space output Single mode Multi mode fiber Power stability Power adjustment range Control modes Automatic Power Control (APC) Optical noise over 8 hour, temperature within +/-3°C System specifications External modulations Analog Modulation Rise / fall time Plug and Play version provide with: Digital Modulation Rise / fall time -3dB modulation bandwidth ControlBoxx controller Manual shutter DC power supply Transverse singlemode free-space beam Beam diameter (typ) at 1/e², Beam quality factor Beam circularity, in far field Polarization state 5 cm from the beam aperture full beam, in far field Available options • • • • • ACX-HTSK-1 Heat sink for operation in ambient air up to 38°C ACX-HTSK-7 for operation in ambiant air up to 46°C OPT-SHTE-LCX Electro-mechanical shutter L1C-MPA for power adjustment L1C-AOM for high speed modulation Fiber coupling options ** General specifications Plug and Play version Polarization extinction ratio Fiber output connector Power stability Compliance Operating temperature Fiber optical characteristics 10 to 38°C ambiant air with optional heat sink Power consumption Storage temperature Humidity Supply voltage (ACX-FCPM only) Fiber length external power supply Warm-up time over 8 hours and within ±3k ≤ 10 minutes USB ControlBoxx controller Warranty : 18 months from shipment date *Specifications at nominal power ** Variant are avaialable on demand CONTACT US LASER 3B Oxxius operates a continuous improvement programme which can result in specifications being modified without notice. Oxxius S.A Phone : +33 296 48 70 28 4 rue Louis de Broglie sa