Product Instructions OxyGO CPAP SANITIZER +
20Pages

.gniog peek nac uoy os sezitinas dna snaelC snoitcurtsnI tcudorP

SDRAUGEFAS TNATROPMI !gninraW !tcudorp siht gnisu erofeb snoitcurtsni lla daeR .tcudorp siht rof snoitcurtsni gnitarepo dna ytefas tnatropmi sniatnoc launam sihT .SNOITCURTSNI ESEHT EVAS When using any electrical appliance, basic safety precautions should always be followed to prevent risk of electrical shock, including the following: WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED BEFORE ATTEMPTING TO MOVE OR CLEAN THE DEVICE 1. To protect against risk of electrical shock, do no immerse cord, plug, power adapter, or the OxyGo CPAP Sanitizer+ device in...

snoitcurtsnI tcudorP +rezitinaS PAPC oGyxO Congratulations on your purchase of an OxyGo CPAP Sanitizer+ and device cleaner! Please carefully review the operation and safety information for the OxyGo CPAP Sanitizer+ and follow all recommendations. Use of this product in a manner other than described in these product instructions or specified by the manufacturer may hinder safety protection provided by this equipment. Please review and familiarize yourself with the function diagrams that identify the buttons, display, and features of the device. They will be frequently referred to in this...

stnetnoC fo elbaT Items included Menu Panel Operating Instructions Setting Clock Manual Mode Settings UV-C sanitizing in manual mode Activated Oxygen sanitizing in manual mode UV & Activated Oxygen sanitizing in manual mode Auto Mode Settings Replacing carbon filters Routine Care

?+rezitinaS PAPC oGyxO ruoy htiw semoc tahW OxyGo CPAP Sanitizer+ Device 1700-5010 Power Cord 1700-5050 Screwdriver for filter changes Product instructions 1700-5051

2. Activated carbon filter

lenaP uneM a. Remaining sanitizing time c. Activated Oxygen indicator

snoitcurtsnI gnitarepO Setting the Clock How to set the clock. 1. Press and hold the timer button then release the button. 2. The hour will begin flashing which will allow the number to be changed up or down. 3. Press the + button to increase the time or the - button to decrease the time. This will adjust the hours with the hour display flashing. Then select AM or PM. 4. Once the display has flashed 4 times the adjusted hour time will be saved. 5. To adjust the minutes press and hold the timer button again to allow the minutes to flash. 6. Press the + button to increase the time or the -...

sgnitteS edoM launaM How to perform UV-C sanitizing in manual mode To perform UV-C (ultraviolet light) sanitizing ONLY follow these instructions. 1. Open the lid of the device by pushing the large “OPEN” button on the front of the device. 2. Place items to be sanitized using UV light into the chamber of the OxyGo CPAP Sanitizer+. These items can include CPAP masks and hoses, remote controls, toothbrushes, combs, pens, and any other item to be sanitized that will fit inside of the chamber. NOTE: For best results, avoid stacking items when placing them into the chamber to allow for maximum UV...

sgnitteS edoM launaM How to perform Activated Oxygen sanitizing in manual mode To perform Activated Oxygen sanitizing ONLY follow these instructions. 1. Open the lid of the OxyGo CPAP Sanitizer+ by pushing the large OPEN button on the front of the device. 2. Open the blue internal sealing lid inside the chamber by lifting and partially rotating it counterclockwise. This blue sealing lid is in the top right corner of the bottom of the chamber. This will allow the Activated Oxygen into the chamber. 3. Place items to be sanitized using Activated Oxygen into the chamber of the OxyGo CPAP...

sgnitteS edoM launaM How to perform Activated Oxygen sanitizing in manual mode - cont'd 10. When the cycle is completed 4 dashes will appear on the screen to show that the cycle is complete. 11. After the cycle is completed allow the OxyGo CPAP Sanitizer+ sit for 2 hours for the Activated Oxygen to dissipate prior to opening. 12. Open the lid by pressing the large Open Button on the front of the device and safely remove the items.

sgnitteS edoM launaM How to perform both UV & Activated Oxygen sanitizing in manual mode To perform UV & Activated Oxygen disinfecting follow these instructions. 1. Open the lid of the OxyGo CPAP Sanitizer+ by pushing the large OPEN button on the front of the device. 2. Open the blue internal sealing lid inside of the chamber by lifting and partially rotating it counterclockwise. This blue sealing lid is located in the top right corner of the bottom of the chamber. 3. Place items to be sanitized using Activated Oxygen into the chamber of the OxyGo CPAP Sanitizer+. These items can include...

sgnitteS edoM otuA How to set the sanitizing mode using the timer To set the timer on the OxyGo CPAP Sanitizer+ for the device to start automatically at a specified time follow these instructions. 1. Set the clock as described in the basic instructions. 2. Put your items to be sanitized into the chamber of the OxyGo CPAP Sanitizer+. 3. Choose one of the three mode options: UV, Activated Oxygen, or both UV & Activated Oxygen. Follow the instructions as described in the manual mode to choose an option. 4. Set the duration of the mode as described in the manual mode settings. 5. Press the...

sretliF nobraC gnicalpeR The activated carbon filters are recommended to be replaced every 2 months with daily use. 1. The first filter is located in the lower left corner of the bottom inside the chamber. It is round with many small holes in it. The OxyGo CPAP Sanitizer+ device comes with six replacement filters. Additional replacement filters are available through your provider of the device. 2. The second filter is located underneath the OxyGo CPAP Sanitizer+. 3. Remove the screw in the center of the filter using the screwdriver included with your device. 4. With the screw removed,...

eraC enituoR The activated carbon filters are recommended to be replaced every 2 months with daily use. 1. Do not expose the OxyGo CPAP Sanitizer+ device to damp environments. 2. Do not expose the OxyGo CPAP Sanitizer+ to sunlight or direct heat for extended periods of time. 3. When using the product place it in a clean, dry, well-ventilated area. 4. Do not use the device if the case is cracked or damaged or if you notice that other damage to the device or its components has occurred. 5. Do not use harsh liquids or cleaners to clean the product. These may damage the surface of the device....