P3 Medical Technical Data Sheet Product Name Camera/Cable Drape ECN 150-250S General Description The camera/cable drape ECN 150-250S is a low density polythene film tube. Prior to use the film is wound into a circular high density polythene housing thus shortening the length and facilitating packaging and application. The free end is terminated with a tapered section welded into the film. A length of repositionable self-adhesive polythene tape and two nylon twist lock clips are also supplied which may be used to secure the drape. This drape is intended to provide a sterile sheath over cables or other long thin flexible items in order to isolate them from their surroundings. The presentation is intended to allow the simple insertion of the object to be sheathed and for the controlled extension of the length of the film. Unit pack: Shelf pack: Low density polyethylene, High density polythene, Low density polythene film 163µ with repositionable acrylic adhesive, Siliconised paper Technical details Length: Width: Tube diameter: Film thickness: Latex status: Latex free Regulatory compliance Meets the essential requirements of directive 93/42/EEC as amended 2007/47/EC for Class I Sterile medical Devices. Single packed: film front fully peelable pouch Corrugated board carton of 50 pieces Manufacturing environment Manufactured in a cleanroom constructed to comply with ISO 14644 Class 8 @ 0.5μ manned Sterilisation Terminally sterilised by EtO Filename: Data Sheet ECN 150-250S Date effective: 19/11/2012 Issue No: 1 UNCONTROLLED IF PRINTED OR EMAILED