Rigid Curette Panpac Medical Corporation 6F-2, No. 202, Sec. 3, Ta-Tong Road, Shi-Chih District, New Taipei City, Taiwan TEL : 886-2-86472242 FAX : 886-2-86472770 LATEX FREE The Panpac Curette is designed and manufactured with care in our laboratories, in order to reduce potential patient trauma. Panpac curette combine a minimum outer diameter with a maximum inner diameter for fast, safe and total evacuation by suction of uterine cavity. Single patient use only. Measure uterine depth. Dilate the cervix if necessary. Introduce INTRACURETTE through the cervical canal into the uterus up to the fundus. Connect the curette to the suction system. Operate by rotating the curette 360∘ to aspirate throughout the uterus cavity accurately. Repeat the operation two or three times. Withdraw INTRACURETTE from the uterus while continuing the rotating movement. Dispose of after use. Manufactured by press injection, the curette are automatically transferred into environmentally controlled rooms. Where they are inspected and shaped as required. All curette are checked visually. This inspection is necessary to eliminate any flaw. The curettes are then “flamed”, to round off sharp edges. In the final stage, the curette are individually packaged before being sterilized. Used for uterine evacuation and curettage in voluntary pregnancy termination or following miscarriage. Do not move the curette sideways. Do not go beyond the depth measured by the hysterometer. Read the instructions before using the device. Do not reuse. Use only if the package is not damaged. Use immediately after opening. Dispose of after use according to the laws in force. For use only under trained medical staff. SPECIFICATION Rigid Straight Rigid Curved The diameter of the curette to be used corresponds to the number of weeks of pregnancy (e.g. an 8mm curette should be used for an 8 week pregnancy). U.S. Federal law restricts this device to sale by or on the order of a physician. Do not reuse for avoiding user may be infected